Table of Contents
Advertisement
7.
Duplex Feed Unit
Transports the paper during duplex print-
ing. Install the unit inside the printer.
⇒ P.44 "Installing the Duplex Reversal
Unit"
Important
❒ You cannot install the 2 Tray Finisher unless both the Paper Feed Unit and
Duplex Unit options are installed.
❒ You cannot install the 2 Tray Finisher unless at least the 128 MB SDRAM
Module is installed, or the Printer Hard Disk is installed.
❒ You cannot install both the 2 Tray Finisher and 4-bin Mailbox at the same
time.
❖ ❖ ❖ ❖ Interior
1
2
3
4
1.
Memory Unit Type B (SDRAM
Module)
Attach 64MB, 128MB, or 256MB RAM
into the slot of the Controller Board.
⇒ P.29 "Installing the Memory Unit Type B
(SDRAM Module)"
2.
1394 Interface Unit Type1045
⇒ P.31 "Installing the 1394 Interface Unit
Type1045"
Important
❒ You cannot install the 1394 Interface Unit Type1045 unless at least 64MB
SDRAM Module is installed.
3.
User Account Enhance Unit Type B
⇒ P.34 "Installing the User Account En-
hance Unit TypeB"
4.
Printer Hard Disk Type 3800C
Attach Printer Hard Disk to the Control-
ler Board.
⇒ P.37 "Installing the Printer Hard Disk
Type 3800C"
Installing Options
2
ZDJP002J
19
Advertisement
Table of Contents
