Table of Contents
Advertisement
E
Hang the auxiliary bar on the
deep left end as shown in the il-
lustration, and then install the
stopper that was removed in step
B
.
Make sure the auxiliary bar and
stopper are installed in the posi-
tions shown in the illustration.
F
Raise the Duplex Reversal Unit
slowly, and then adhere it to the
printer.
G
Remove the adhesive tape which
hold the cable, and then connect
the cable of the Duplex Reversal
Unit to the upper connector on the
back of the printer.
ZDJP049J
This completes the installation of
the Duplex Reversal Unit. Install
the Duplex Feed Unit after install-
ing the External Tray.
H
Install the External Tray.
A Stand the External Tray and in-
sert it from the left side with
both hands.
ZDJP050J
Installing Options
2
ZDJP051J
ZDJP052J
45
Advertisement
Table of Contents
