Table of Contents
Advertisement
Setting Up
P
Fasten the rails with a long screw
using provided screwdriver.
2
Q
Push the 2 Tray Finisher slowly
toward the printer until it stops.
R
Remove the tape that is fastening
the cable to the 2 Tray Finisher.
52
S
Connect the cable of the 2 Tray
Finisher to the lower connector on
the back of the printer.
ZDJP078J
T
Install the two 2 Tray Finisher
Trays to the 2 Tray Finisher.
Note
❒ The two Fnisher Trays are iden-
tical.
A Adjust the notch on the left
side of the 2 Tray Fnisher Tray
to the cable coming out from
the 2 Tray Finisher.
ZDJP202J
ZDJP080J
ZDJP082J
Advertisement
Table of Contents
