Table of Contents
Advertisement
I
Connect the flat cable to the Con-
troller Board.
J
Connect the power cable to the
Controller Board.
K
Adjust the Controller Board to the
top and bottom rails, and then
push in slowly until it stops.
Insert the Controller Board firmly
by pushing the left area as shown
in the illustration.
ZDJP119J
L
Tighten two screws to fasten the
Controller Board back into its
original position using provided
screwdriver.
ZDJP117J
Note
❒ Be sure to return the provided
screwdriver to its original posi-
tion on the inside of the front
cover.
ZDJP030J
Installing Options
2
ZDJP801J
ZDJP031J
39
Advertisement
Table of Contents
