Table of Contents
Advertisement
Setting Up
B Remove the adhesive tape and
the corrugated paper inside the
tray as shown in the illustra-
tion.
2
E
Take out the packaged items,
making sure there are two thumb
screws and one mounting brack-
et. Close the tray of the 500-sheet
Paper Feed Unit tightly.
F
Pull out Tray 2 slowly while lift-
ing it up a little.
22
G
Fasten one thumb screw. Use a
coin to fasten it tightly.
H
ZDJX801J
Slide Tray 2 back into the printer
slowly until it stops.
I
Open the right cover of the 500-
sheet Paper Feed Unit.
J
Hook the mounting bracket to the
ZDJP005J
hole as shown in the illustration.
ZDJP008J
ZDJP009J
ZDJP010J
ZDJP011J
Advertisement
Table of Contents
