Access Control - Gestetner DSm725e Reference Manual

Enhanced Network Security
E
Press [Invalid] for the protocol you want to disable.
F
Press [OK].
G
Press the {User Tools/Counter} key.
Reference
Advanced network settings can be specified using Web Image Monitor.
For details, see the Web Image Monitor Help.

Access Control

5
This can be specified by the network administrator.
The machine can control TCP/IP access.
Limit the IP addresses from which access is possible by specifying the access
control range.
For example, if you specify the access control range as [192.168.15.16]-
[192.168.15.20], the client PC addresses from which access is possible will be from
192.168.15.16 to 192.168.15.20.
Limitation
❒ Using access control, you can limit access involving LPD, RCP/RSH, FTP, IPP,
DIPRINT, Web Image Monitor, SmartDeviceMonitor for Client or DeskTop-
Binder. You cannot limit the Monitoring of SmartDeviceMonitor for Client.
❒ You cannot limit access involving telnet, or SmartDeviceMonitor for Admin,
when using the SNMPv1 monitoring.
A
Open a Web browser.
B
Enter "http://(machine's-address)/" in the address bar to access the machine.
C
Log onto the machine.
The network administrator can log on using the appropriate login user name
and login password.
D
Click [Configuration], click [Security], and then click [Access Control].
The [Access Control] page appears.
E
In [Access Control Range], enter the IP addresses from which access to the ma-
chine is permitted.
94