Gestetner DSm725e Reference Manual page 118

Enhanced Network Security
C
Press [Interface Settings].
D
Press [Permit SNMP V3 Communication].
If the setting to be specified does not appear, press [TNext] to scroll down to
other settings.
5
E
Press [Encryption Only].
F
Press [OK].
G
Press the {User Tools/Counter} key.
Note
❒ To use SmartDeviceMonitor for Admin for encrypting the data for speci-
fying settings, you need to specify the network administrator's [Encryption
Password] setting and [Encryption Key] in [SNMP Authentication Information] in
SmartDeviceMonitor for Admin, in addition to specifying [Permit SNMP V3
Communication] on the machine.
❒ If network administrator's [Encryption Password] setting is not specified, the
data for transmission may not be encrypted or sent.
Reference
For details about specifying the network administrator's [Encryption Pass-
word] setting, see p.19 "Registering the Administrator".
For details about specifying [Encryption Key] in SmartDeviceMonitor for
Admin, see the SmartDeviceMonitor for Admin Help.
112