Gestetner DSm725e Reference Manual page 85

H
Press [OK].
Auto Erase Memory is set.
Important
❒ When Auto Erase Memory is set to "On", temporary data that remained on
the hard disk when Auto Erase Memory was "Off" might not be overwrit-
ten.
Note
❒ Should the main power switch of the machine be turned off before over-
writing is completed, the temporary data will remain on the hard disk un-
til the main power switch is next turned on and overwriting is resumed.
❒ If the overwriting method is changed while overwriting is in progress, the
remainder of the temporary data will be overwritten using the method set
originally.
Canceling Auto Erase Memory
A
A
Follow steps
B
Press [Off].
C
Press [OK].
Auto Erase Memory is disabled.
Note
❒ To set Auto Erase Memory to "On" again, repeat the procedure in "Auto Erase
Memory Setting".
D
to in "Auto Erase Memory Setting".
Deleting Data on the Hard Disk
3
79