Setting the Paper Size Using the Control Panel
Follow the procedure below to set the machine using the control panel when
loading standard size paper onto the bypass tray.
Important
❒ The following procedures are not required if you select [Driver / Command]
from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see "Printer
Features", General Settings Guide). In that case, set the paper size using the
printer driver.
❒ Under [Printer Features], [System], if you set [Bypass Tray Setting Priority] to [Driv-
er/ Command] , paper size settings made on the printer driver must match
those made on the control panel. If they do not match, an error message ap-
pears and printing stops if [Printer Features], [System], [Auto Continue] is not set.
For details about [Printer Features] settings, see General Settings Guide.
A
Press the {User Tools/Counter} key on the control panel.
B
Press [System Settings].
C
Press the [Tray Paper Settings] tab.
D
Press [Printer Bypass Paper Size].
E
Select the paper size.
F
Press [OK].
G
Press the {User Tools/Counter} key.
The initial screen appears.
Note
❒ When loading OHP transparencies or thick paper, set paper size and paper
type.
❒ [Auto Detect] is the default setting for [Printer Bypass Paper Size].
Reference
For printer driver settings, see the printer driver Help.
14