Resetting Measurements - Omron K3HB-P User Manual

5.7 Resetting Measurements

Remarks
When the RESET input turns ON or the
for at least 1 s, the maximum value, minimum value, and outputs are
cleared. Measurement is not performed during RESET input.
Max.
value
Min.
value
Comparative
set value HH/H
Comparative
set value LL/L
RESET input
Output
HH/H
Output LL/L
• The display during RESET input is "-----" and all outputs are
OFF.
• HOLD and TIMING inputs are accepted, but measurement is
disabled during RESET input.
"5.8 Not Performing Measurements for Set Intervals" → P.5-34
5.7 Resetting Measurements
[MAX/MIN] Key is pressed
Measurement
value
No measurement
status
R P C
5-33