Section 5 Functions And Operations - Omron K3HB-P User Manual

Section 5 Functions and
Operations
Knowledge Required for Setting Parameters.....................................
5.1 Setting the Function for the K3HB-R..........................................
5.2 Setting the Function for the K3HB-P..........................................
5.3 Setting the Function for the K3HB-C..........................................
5.4 Setting Input Types ....................................................................
5.5 Setting Prescale Values .............................................................
5.6 Setting the Auto-zero Time ........................................................
5.7 Resetting Measurements...........................................................
5.8 Not Performing Measurements for Set Intervals ........................
5.9 Averaging Input ..........................................................................
5.10 Changing Comparative Output Patterns ....................................
5.11 Preventing Output Chattering ....................................................
5.12 Outputting for a Set Interval .......................................................
5.13 Delaying Output OFF Timing .....................................................
5.14 Holding Measurement Status ....................................................
5.15 Holding Comparative Outputs....................................................
5.16 Allocating Another Output to PASS Output................................
5.17 Reversing Output Logic .............................................................
5.18 No Output before PASS Range..................................................
5.19 Performing Linear Output...........................................................
5.20 Changing the Display Refresh Period........................................
5.21 Setting a Compensation Value for the Measurement Value ......
5.22 Holding Measurement Values ....................................................
5.23 Holding Maximum and Minimum Values....................................
5.24 Changing Normal Display Values to Maximum and
Minimum Values.........................................................................
5.25 Displaying/Not Displaying Comparative Set Values...................
5.26 Changing Display Colors ...........................................................
5.27 Using the Position Meter............................................................
5.28 Automatic Return to Normal Display..........................................
5.29 Performing Output Tests ............................................................
5.30 Using Prescale/Comparative Set Value Banks ..........................
5.31 Copying Bank Prescale Values..................................................
5.32 Copying Bank Comparative Set Values .....................................
5.33 Initializing All Settings ................................................................
5.34 Limiting Key Operations .............................................................
5-2
5-9
5-16
5-23
5-27
5-28
5-31
5-33
5-34
5-36
5-39
5-42
5-44
5-46
5-48
5-49
5-51
5-53
5-55
5-57
5-60
5-61
5-63
5-65
5-67
5-68
5-69
5-71
5-73
5-74
5-75
5-81
5-82
5-83
5-84
5-1