Limiting Key Operations - Omron K3HB-P User Manual

Section 5 Functions and Operations

5.34 Limiting Key Operations

p
run. pt
L
(RUN.PT)
p
set. pt
L
(SET.PT)
p
wt. pt
L
(WT.PT)
p
mm. pt
L
(MM.PT)
5-84
The key protect function limits level and parameter changes using key
operations. There are five kinds of key protection. The parameters,
settings and details on the limitations of each kind of protection are
outlined below.
: Enabled, : Prohibited
● RUN/Adjustment Protect
The following parameter limits key operations in RUN level and
movement to adjustment level.
Set
Parameter
value
0
RUN/adjustment
protect
1
run.pt
2
Note: When there are no enabled menu items on the adjustment level
(i.e., when bank selection is at a setting other than "Key" and
there is no communications function), movement to the
adjustment level is not possible.
● Setting Level Protect
The following parameter limits moving to other levels.
Parameter Set value
0
Setting level
1
protect
set.pt
2
● Setting Change Protect
The following parameter disables changing settings with key
operations.
Parameter
Setting change protect
wt.pt
* All protect level parameters and movement to the advanced function
setting level and calibration level can be changed.
Restriction details
RUN level
Present Comparative
value set value
display change
Restriction details
Move to the initial
setting level
Set value Restriction details
off
Setting change using key
operations: Enabled
on
Setting change using key
operations: Prohibited
Protect level
R P C
Move to the
adjustment
level
(See note.)
Move to the
advanced
function
setting level