Airstream EXPERT 2V2SA User Manual page 9

EXPERT 2V2SA
LED
Clean Mode
Humidity Compensation
Outside Temp. Compensation
Static Pressure Compensation
Low Temperature Override
De-icing Stage 2
Temperature Curve
Minimum Speed Curve
0-10V Curve
Defective probe alarm
Temperature alarm
Water alarm
0-10V output
Inlet Open
Close
Manual Mode
Reset
Mist/ Soak
Fan stages 1-4
Heaters 1-2
Heat mat
MEANING
Solid LED: Clean mode is active.
Solid LED A RH compensation function is ON.
Solid LED The outside temperature compensation is ON.
Solid LED A static pressure compensation is applied on the inlet
opening.
Solid LED The low temperature override parameters are ON.
Solid LED Stage 2 fans are being de-iced.
Solid LED The temperature set point is defined by a curve.
Solid LED The minimum ventilation speed is defined by a curve.
Solid LED The start T° of the 0-10V output is defined by a curve.
Solid LED A defective probe alarm is active.
Flashing LED A defective probe alarm occurred, no longer exists,
and must be acknowledged.
Solid LED A temperature alarm is active.
Flashing LED A temperature alarm occurred, no longer exists, and
must be acknowledged.
Solid LED A water spill or water consumption alarm is active.
Flashing LED A water spill or water consumption alarm occurred, no
longer exists, and must be acknowledged.
Solid LED The 0-10V output is active.
Solid LED The air inlet is opening.
Solid LED The air inlet is closing.
Solid LED The inlet operates in manual mode.
Flashing LED The controller is now opening or closing the air inlet in
order to reset the actuator's position.
Solid LED Time On of the mist or soaking timer.
Flashing LED Time Off of the mist or soaking timer.
Solid LED The fan stage is ON.
Solid LED The heating stage is ON.
Solid LED The heat mat is ON.
EXPERT 2V2SA, rev. 10
9