Table of Contents
Advertisement
EXPERT 2V2SA
12.3.
Heater Run Time History
The controller has an history in which run
times of the heating units are logged in for
the past 6 days.
1. From the main menu, select: HEATER
RUN TIME.
*This menu is accessible if at least one heating
stage is enabled in the User Setup Menu.
Heater 1
01/01/0X
2:30
2. The run time of the first heating stage is
displayed along with the time and date.
Press the down-arrow key to scroll down
the heater run time history.
50
EXPERT 2V2SA, rev.10
13.
CURRENT
CONDITIONS
13.1.
Current Room Temperature
The room temperature is the average reading
of the temperature probes that have been
chosen for this purpose in the User Setup
Menu.
1. From the main menu, select: ROOM
TEMPERATURE.
2.
Room T°
76.5 °F
Pr.Act:1234
The average temperature probes are flash-
ing on screen.
3. Press the down-arrow key once. The
minimum temperature recorded today is
displayed along with the time and date.
Room T° 01/01/0X
Min 72.2
1:10A
4. Press the down-arrow key once again.
The maximum temperature recorded
today is displayed along with the time
and date.
Room T° 01/01/0X
Max 76.2
10:25A
5. Keep pressing on the down-arrow key
to look at the minimum and maximum
temperature readings of the past six days.
Advertisement
Table of Contents
