Configuring A Filter Rule; Configuring A Tcp/Ip Filter Rule; Table 86 Rule Abbreviations Used - ZyXEL Communications Wireless Router P-334 User Manual

Table 85 Abbreviations Used in the Filter Rules Summary Menu
FIELD
m
n
The protocol dependent filter rules abbreviation are listed as follows:
Refer to the next section for information on configuring the filter rules.

27.2.1 Configuring a Filter Rule

To configure a filter rule, type its number in Menu 21.1.1 - Filter Rules Summary and press
[ENTER] to open menu 21.1.1.1 for the rule.
To speed up filtering, all rules in a filter set must be of the same class, i.e., protocol filters or
generic filters. The class of a filter set is determined by the first rule that you create. When
applying the filter sets to a port, separate menu fields are provided for protocol and device
filter sets. If you include a protocol filter set in a device filter field or vice versa, the Prestige
will warn you and will not allow you to save.

27.2.2 Configuring a TCP/IP Filter Rule

This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base
the rule on the fields in the IP and the upper layer protocol, for example, UDP and TCP
headers.
Chapter 27 Filter Configuration
DESCRIPTION
Action Matched.
"F" means to forward the packet immediately and skip checking the remaining rules.
"D" means to drop the packet.
"N" means to check the next rule.
Action Not Matched
"F" means to forward the packet immediately and skip checking the remaining rules.
"D" means to drop the packet.
"N" means to check the next rule.

Table 86 Rule Abbreviations Used

ABBREVIATION DESCRIPTION
IP
Pr
SA
SP
DA
DP
GEN
Off
Len
Protocol
Source Address
Source Port number
Destination Address
Destination Port number
Offset
Length
Prestige 334 User's Guide
260