Configuring A Filter Rule; Tcp/Ip Filter Rule; Table 6-2 Abbreviations Used If Filter Type Is Ip - ZyXEL Communications Prestige 100L User Manual

The protocol dependent filter rules abbreviation are listed as follows:
l
If the filter type is IP, the following abbreviations listed in the following table are used.
ABBREVIATION
Pr
SA
SP
DA
DP
l
If the filter type is GEN (generic), the abbreviations listed in the following table are used.
Table 6-3
ABBREVIATION
Off
Len
Refer to the next section for information on configuring the filter rules.

6.2.2 Configuring a Filter Rule

To configure a filter rule, type its number in Menu 21.1 - Filter Rules Summary and press the [Enter] key
to open Menu 21.1.1 for the rule.
To speed up filtering, all rules in a filter set must be of the same class, i.e., protocol filters or generic filters.
The class of a filter set is determined by the first rule that you create. When applying the filter sets to a port,
separate menu fields are provided for protocol and device filter sets. If you include a protocol filter set in a
device filter field or vice versa, the Prestige warns you and you are not allowed to save.

6.2.3 TCP/IP Filter Rule

This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base the rule on
the fields in the IP and the upper layer protocol, e.g., UDP and TCP, headers.
To configure a TCP/IP rule, select TCP/IP Filter Rule from the Filter Type field and press the [Enter] key
to open Menu 21.1.1.1 – TCP/IP Filter Rule, as shown in the following figure.
Filters
Table 6-2 Abbreviations Used If Filter Type Is IP
Protocol
Source Address
Source Port number
Destination Address
Destination Port number
Abbreviations Used If Filter Type Is GEN
Offset
Length
DESCRIPTION
DESCRIPTION
Prestige 100L IDSL Router
6-7