Figure 6 Wizard 2: Ethernet Encapsulation; Table 2 Wizard 2: Ethernet Encapsulation - ZyXEL Communications Wireless Router P-334 User Manual

Figure 6 Wizard 2: Ethernet Encapsulation

The following table describes the labels in this screen.

Table 2 Wizard 2: Ethernet Encapsulation

LABEL
ISP Parameters for Internet Access
Encapsulation
Service Type
User Name
Password
Login Server IP
Address
Login Server
Relogin Every
(min)
Back
Next
Chapter 3 Wizard Setup
DESCRIPTION
You must choose the Ethernet option when the WAN port is used as a regular
Ethernet. Otherwise, choose PPP over Ethernet or PPTP for a dial-up connection.
Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR-
Manager (Roadrunner Manager authentication method), RR-Toshiba
(Roadrunner Toshiba authentication method) or Telia Login.
The following fields are not applicable (N/A) for the Standard service type.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Type the authentication server IP address here if your ISP gave you one.
This field only applies when you select Telia Login in the Service Type field. Type
the domain name of the Telia login server, for example "login1.telia.com".
This field only applies when you select Telia Login in the Service Type field. The
Telia server logs the Prestige out if the Prestige does not log in periodically. Type
the number of minutes from 1 to 59 (30 default) for the Prestige to wait between
logins.
Click Back to return to the previous screen.
Click Next to continue.
Prestige 334 User's Guide
46