Prestige 334 Quick Start Guide 1 Introducing the Prestige The Prestige is a broadband sharing gateway with a built-in four-port 10/100 Mbps switch that makes it easy for people to set up a small home/office network and share Internet access via a broadband (cable/DSL) modem.
Prestige 334 Quick Start Guide 2 Hardware Installation 2.1 Rear Panel LABEL DESCRIPTION LAN 10/100M Use an Ethernet cable to connect at least one computer for initial Prestige configuration. These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically adjust to the type of Ethernet cable you use (straight-through or crossover)).
Prestige 334 Quick Start Guide STATUS COLOR DESCRIPTION Green The Prestige is receiving power. Blinking The Prestige is performing testing. LAN 1- 4 The LAN is not connected. Green The Prestige has a successful 10Mb Ethernet connection. Blinking The Prestige is sending/receiving data Amber The Prestige has a successful 100Mb Ethernet connection.
Page 5
Prestige 334 Quick Start Guide The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). - To have your computer assigned a dynamic IP address, click Obtain an IP address automatically. -To configure a static IP address, click Use the following IP Address and fill in the IP address (choose one from192.168.1.2 to 192.168.1.254), Subnet mask...
Prestige 334 Quick Start Guide 4 Configuring Your Prestige Choose one of these methods to access and configure the Prestige. This Quick Start Guide shows you how to use the web configurator wizard only. See your User’s Guide for background information on all Prestige features and SMT configuration.
Prestige 334 Quick Start Guide Step 4. You should now see the web configurator MAIN MENU screen. Click WIZARD to begin a series of screens to help you configure your Prestige for the first time. Click a link under MAIN MENU in the navigation panel to configure that Prestige feature.
Page 8
Prestige 334 Quick Start Guide System Name is for identification purposes. Enter your computer's "Computer Name". The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used.
Prestige 334 Quick Start Guide WAN IP Address Assignment Select Get automatically from ISP if your ISP did not assign you a fixed IP address. Select Use fixed IP address if the ISP assigned a fixed IP address and then enter your IP address and subnet mask in the next two fields.
Prestige 334 Quick Start Guide 5 Troubleshooting PROBLEM CORRECTIVE ACTION None of the LEDs turn Make sure that you have the correct power adapter connected to the Prestige and plugged in on when you turn on the to an appropriate power source. Check all cable connections.