Table 70 Menu 3.2.1: IP Alias Setup
FIELD
IP Subnet Mask
RIP Direction
Version
Incoming Protocol
Filters
Outgoing Protocol
Filters
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to
save your configuration, or press [ESC] at any time to cancel.
Chapter 21 Menu 3 LAN Setup
DESCRIPTION
Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the Prestige.
Press [SPACE BAR] and then [ENTER] to select the RIP direction. Options are
Both, In Only, Out Only or None.
Press [SPACE BAR] and then [ENTER] to select the RIP version. Options are RIP-
1, RIP-2B or RIP-2M.
Enter the filter set(s) you wish to apply to the incoming traffic between this node
and the Prestige.
Enter the filter set(s) you wish to apply to the outgoing traffic between this node
and the Prestige.
Prestige 334 User's Guide
216