ZyXEL Communications Wireless Router P-334 User Manual page 101

Table 27 Trigger Port
LABEL
Incoming
Start Port
End Port
Trigger
Start Port
End Port
Apply
Reset
Chapter 7 Network Address Translation (NAT) Screens
DESCRIPTION
Incoming is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The Prestige forwards the traffic with this port (or range of
ports) to the client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the Prestige to
record the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
Prestige 334 User's Guide
100