ZyXEL Communications P-335 Plus User Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Network Router
  5. P-335 Plus
  6. User manual
ZyXEL Communications P-335 Plus User Manual

ZyXEL Communications P-335 Plus User Manual

Firewall router with usb print server
Hide thumbs Also See for P-335 Plus:
Table of Contents

Advertisement

Quick Links

P-335 Plus
Firewall Router with USB Print Server
User's Guide
Version 3.60
Edition 1
8/2006

Advertisement

Table of Contents
loading

Related Manuals for ZyXEL Communications P-335 Plus

Summary of Contents for ZyXEL Communications P-335 Plus

  • Page 1 P-335 Plus Firewall Router with USB Print Server User’s Guide Version 3.60 Edition 1 8/2006...

  • Page 3: Copyright

    ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved.

  • Page 4: Certifications

    P-335 Plus User’s Guide Certifications Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operations.

  • Page 5: Safety Warnings

    P-335 Plus User’s Guide Safety Warnings For your safety, be sure to read and follow all warning notices and instructions. • Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel can service the device.

  • Page 6: Zyxel Limited Warranty

    P-335 Plus User’s Guide ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two years from the date of purchase. During...

  • Page 7: Customer Support

    P-335 Plus User’s Guide Customer Support Please have the following information ready when you contact customer support. • Product model and serial number. • Warranty Information. • Date that you received your device. • Brief description of the problem and the steps you took to solve it.
  • Page 8 P-335 Plus User’s Guide METHOD SUPPORT E-MAIL TELEPHONE WEB SITE REGULAR MAIL SALES E-MAIL FTP SITE LOCATION support@zyxel.no +47-22-80-61-80 www.zyxel.no ZyXEL Communications A/S Nils Hansens vei 13 NORWAY sales@zyxel.no +47-22-80-61-81 0667 Oslo Norway info@pl.zyxel.com +48 (22) 333 8250 www.pl.zyxel.com ZyXEL Communications ul.

  • Page 9: Table Of Contents

    P-335 Plus User’s Guide Table of Contents Copyright ........................3 Certifications ......................4 Safety Warnings ....................... 5 ZyXEL Limited Warranty..................6 Customer Support....................7 Table of Contents ..................... 9 Preface ........................25 Chapter 1 Getting to Know Your ZyXEL Device..............27 1.1 Overview ......................27...
  • Page 10 P-335 Plus User’s Guide 3.2.2 Domain Name ...................45 3.3 Connection Wizard: STEP 2: Internet Configuration ..........45 3.3.1 Ethernet Connection .................46 3.3.2 PPPoE Connection ...................47 3.3.3 PPTP Connection ..................48 3.3.4 Your IP Address ..................49 3.3.5 WAN IP Address Assignment ..............50 3.3.6 IP Address and Subnet Mask ..............50 3.3.7 DNS Server Address Assignment .............51...
  • Page 11 P-335 Plus User’s Guide Chapter 7 Network Address Translation (NAT) ..............77 7.1 NAT Overview ....................77 7.2 Using NAT ......................77 7.2.1 Port Forwarding: Services and Port Numbers ..........77 7.2.2 Configuring Servers Behind Port Forwarding (Example) ......78 7.3 General NAT Screen ..................78 7.4 NAT Application Screen...
  • Page 12 P-335 Plus User’s Guide Chapter 11 Static Route Screens ................... 101 11.1 Static Route Overview ..................101 11.2 IP Static Route Screen ...................102 11.2.1 Static Route Setup Screen ..............103 Chapter 12 Bandwidth Management ..................105 12.1 Bandwidth Management Overview ...............105 12.2 Application-based Bandwidth Management ...........105 12.3 Subnet-based Bandwidth Management ............105...
  • Page 13 P-335 Plus User’s Guide 14.4.1 Installing UPnP in Windows Me ............125 14.4.2 Installing UPnP in Windows XP ............126 14.5 Using UPnP in Windows XP Example ............127 14.5.1 Auto-discover Your UPnP-enabled Network Device ......127 14.5.2 Web Configurator Easy Access ............128 14.5.3 Web Configurator Easy Access ............129 Chapter 15 Print Server......................
  • Page 14 P-335 Plus User’s Guide Chapter 20 Configuration Mode ..................... 161 Chapter 21 Troubleshooting ....................163 21.1 Problems Starting Up the ZyXEL Device ............163 21.2 Problems with the LAN ...................163 21.3 Problems with the WAN .................164 21.4 Problems with Restricted Web Pages and Keyword Blocking .......164 21.5 Problems with the Password ................165...
  • Page 15 P-335 Plus User’s Guide Internal SPTGEN ....................229 Table of Contents...
  • Page 16 P-335 Plus User’s Guide Table of Contents...
  • Page 17 P-335 Plus User’s Guide List of Figures Figure 1 ZyXEL Device as a Print Server ................27 Figure 2 ZyXEL Device as a Print Server and Router Combined ........28 Figure 3 Front Panel ......................29 Figure 4 Change Password Screen ..................32 Figure 5 Web Configurator Status Screen (Router Mode) ..........
  • Page 18 P-335 Plus User’s Guide Figure 37 Trigger Port Forwarding Process: Example ............83 Figure 38 NAT Advanced ....................84 Figure 39 Dynamic DNS ..................... 88 Figure 40 Using IP Alias to Solve the Triangle Route Problem ........... 91 Figure 41 General ....................... 91 Figure 42 Services ......................
  • Page 19 P-335 Plus User’s Guide Figure 80 Macintosh HD folder ................... 144 Figure 81 Applications Folder ..................... 144 Figure 82 Utilities Folder ..................... 144 Figure 83 Printer List Folder ....................145 Figure 84 Printer Configuration ................... 145 Figure 85 Printer Model ....................... 146 Figure 86 Print Server ......................
  • Page 20 P-335 Plus User’s Guide Figure 123 Macintosh OS X: Apple Menu ................195 Figure 124 Macintosh OS X: Network ................. 196 Figure 125 Red Hat 9.0: KDE: Network Configuration: Devices ........197 Figure 126 Red Hat 9.0: KDE: Ethernet Device: General ..........197 Figure 127 Red Hat 9.0: KDE: Network Configuration: DNS ..........
  • Page 21 P-335 Plus User’s Guide List of Tables Table 1 Front Panel LEDs ....................29 Table 2 Status Screen Icon Key ..................33 Table 3 Web Configurator Status Screen (Router Mode) ..........34 Table 4 Status Screen Icon Key ..................36 Table 5 Web Configurator Status Screen (Print Server Mode) ...........
  • Page 22 P-335 Plus User’s Guide Table 37 Content Filter: Schedule ..................98 Table 38 IP Static Route ..................... 102 Table 39 Static Route Setup ....................103 Table 40 Application and Subnet-based Bandwidth Management Example ...... 106 Table 41 Bandwidth Management Priorities ............... 107 Table 42 Media Bandwidth Management Setup: Services ..........
  • Page 23 P-335 Plus User’s Guide Table 80 Subnet 1 ......................204 Table 81 Subnet 2 ......................205 Table 82 Subnet 1 ......................205 Table 83 Subnet 2 ......................206 Table 84 Subnet 3 ......................206 Table 85 Subnet 4 ......................206 Table 86 Eight Subnets ......................
  • Page 24 P-335 Plus User’s Guide...

  • Page 25: Preface

    Settings and then click Control Panel. • “e.g.,” is a shorthand for “for instance”, and “i.e.,” means “that is” or “in other words”. • The P-335 Plus series may be referred to as the “ZyXEL Device” in this User’s Guide. Preface...
  • Page 26 P-335 Plus User’s Guide Graphics Icons Key ZyXEL Device Computer Notebook computer Server DSLAM Firewall Modem Switch Router Preface...

  • Page 27: Getting To Know Your Zyxel Device

    P-335 Plus User’s Guide H A P T E R Getting to Know Your ZyXEL Device This chapter introduces the main features and applications of the ZyXEL Device. 1.1 Overview This ZyXEL Device is a secure router with a 4-port switch and print server.

  • Page 28: Print Server And Router Combined

    P-335 Plus User’s Guide 1.1.2 Print Server and Router Combined For Internet access, connect the WAN Ethernet port to your existing Internet access gateway (company network, or your cable or DSL modem for example). Connect computers or servers to the LAN ports for shared Internet access. See the Quick Start Guide for instructions on hardware connections.

  • Page 29: Front Panel Leds

    P-335 Plus User’s Guide 1.3 Front Panel LEDs Figure 3 Front Panel The following table describes the LEDs. Table 1 Front Panel LEDs COLOR STATUS DESCRIPTION Green The ZyXEL Device is receiving power and functioning properly. Blinking The ZyXEL Device is performing testing.
  • Page 30 P-335 Plus User’s Guide Chapter 1 Getting to Know Your ZyXEL Device...

  • Page 31: Introducing The Web Configurator

    P-335 Plus User’s Guide H A P T E R Introducing the Web Configurator This chapter describes how to access the ZyXEL Device web configurator and provides an overview of its screens. 2.1 Web Configurator Overview The web configurator is an HTML-based management interface that allows easy ZyXEL Device setup and management via Internet browser.

  • Page 32: Resetting The Zyxel Device

    P-335 Plus User’s Guide Figure 4 Change Password Screen Note: The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes). Simply log back into the ZyXEL Device if this happens to you.

  • Page 33: Figure 5 Web Configurator Status Screen (Router Mode)

    P-335 Plus User’s Guide Figure 5 Web Configurator Status Screen (Router Mode) The following table describes the icons shown in the Status screen. Table 2 Status Screen Icon Key ICON DESCRIPTION Select a language from the drop-down list box to have the web configurator display in that language.

  • Page 34: Table 3 Web Configurator Status Screen (Router Mode)

    P-335 Plus User’s Guide The following table describes the labels shown in the Status screen. Table 3 Web Configurator Status Screen (Router Mode) LABEL DESCRIPTION Device Information System Name This is the System Name you enter in the Maintenance > System > General screen.

  • Page 35: Print Server Mode Status

    P-335 Plus User’s Guide Table 3 Web Configurator Status Screen (Router Mode) (continued) LABEL DESCRIPTION Rate For the LAN ports, this displays the port speed and duplex setting or N/A when the line is disconnected. For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation.

  • Page 36: Table 4 Status Screen Icon Key

    P-335 Plus User’s Guide The following table describes the icons shown in the Status screen. Table 4 Status Screen Icon Key ICON DESCRIPTION Select a language from the drop-down list box to have the web configurator display in that language.

  • Page 37: Navigation Panel

    P-335 Plus User’s Guide Table 5 Web Configurator Status Screen (Print Server Mode) (continued) LABEL DESCRIPTION System Setting - Configuration Mode This shows whether the advanced screens of each feature are turned on (Advanced) or not (Basic). - System Operation Mode This shows whether the ZyXEL Device is working as a router or a print server.

  • Page 38: Table 7 Screens Summary

    P-335 Plus User’s Guide Table Key: An O in a mode’s column shows that the device mode has the specified feature. The information in this table was correct at the time of writing, although it may be subject to change.

  • Page 39: Summary: Bandwidth Management Monitor

    P-335 Plus User’s Guide Table 7 Screens Summary LINK FUNCTION Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP address(es) users can use HTTP to manage the ZyXEL Device. Telnet Use this screen to configure through which interface(s) and from which IP address(es) users can use Telnet to manage the ZyXEL Device.

  • Page 40: Summary: Dhcp Table

    P-335 Plus User’s Guide 2.4.5 Summary: DHCP Table DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device provides the TCP/IP configuration for the clients.

  • Page 41: Figure 9 Summary: Packet Statistics

    P-335 Plus User’s Guide Figure 9 Summary: Packet Statistics The following table describes the labels in this screen. Table 9 Summary: Packet Statistics LABEL DESCRIPTION Port This is the ZyXEL Device’s port type. Status For the LAN ports, this displays the port speed and duplex setting or Down when the line is disconnected.
  • Page 42 P-335 Plus User’s Guide Chapter 2 Introducing the Web Configurator...

  • Page 43: Chapter 3 Connection Wizard

    P-335 Plus User’s Guide H A P T E R Connection Wizard This chapter provides information on the wizard setup screens in the web configurator. 3.1 Wizard Setup The web configurator’s wizard setup helps you configure your device to access the Internet.

  • Page 44: Connection Wizard: Step 1: System Information

    P-335 Plus User’s Guide Figure 11 Select a Language 4 Read the on-screen information and click Next. Figure 12 Welcome to the Connection Wizard 3.2 Connection Wizard: STEP 1: System Information System Information contains administrative and system-related information. 3.2.1 System Name System Name is for identification purposes.

  • Page 45: Domain Name

    P-335 Plus User’s Guide 3.2.2 Domain Name The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host name (System Name) on each individual computer, the domain name can be assigned from the ZyXEL Device via DHCP.

  • Page 46: Ethernet Connection

    P-335 Plus User’s Guide This wizard screen varies according to the connection type that you select. Figure 14 Wizard Step 3: ISP Parameters. The following table describes the labels in this screen, Table 11 Wizard Step 2: ISP Parameters CONNECTION TYPE...

  • Page 47: Pppoe Connection

    P-335 Plus User’s Guide 3.3.2 PPPoE Connection Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an IETF (Internet Engineering Task Force) standard specifying how a host personal computer interacts with a broadband modem (for example DSL, cable, wireless, etc.) to achieve access to high-speed data networks.

  • Page 48: Pptp Connection

    P-335 Plus User’s Guide Table 12 Wizard Step 2: PPPoE Connection LABEL DESCRIPTION User Name Type the user name given to you by your ISP. Password Type the password associated with the user name above. Back Click Back to return to the previous screen.

  • Page 49: Your Ip Address

    P-335 Plus User’s Guide The following table describes the fields in this screen Table 13 Wizard Step 2: PPTP Connection LABEL DESCRIPTION ISP Parameters for Internet Access Connection Type Select PPTP from the drop-down list box. To configure a PPTP client, you must configure the User Name and Password fields for a PPP connection and the PPTP parameters for a PPTP connection.

  • Page 50: Wan Ip Address Assignment

    P-335 Plus User’s Guide The following table describes the labels in this screen Table 14 Wizard Step 2: Your IP Address LABEL DESCRIPTION Get automatically from Select this option If your ISP did not assign you a fixed IP address. This is your ISP the default selection.

  • Page 51: Dns Server Address Assignment

    P-335 Plus User’s Guide If the ISP did not explicitly give you an IP network number, then most likely you have a single user account and the ISP will assign you a dynamic IP address when the connection is established. The Internet Assigned Number Authority (IANA) reserved this block of addresses specifically for private use;...

  • Page 52: Figure 19 Wizard Step 2: Wan Ip And Dns Server Addresses

    P-335 Plus User’s Guide Figure 19 Wizard Step 2: WAN IP and DNS Server Addresses The following table describes the labels in this screen Table 16 Wizard Step 2: WAN IP and DNS Server Addresses LABEL DESCRIPTION WAN IP Address Assignment My WAN IP Address Enter your WAN IP address in this field.

  • Page 53: Wan Mac Address

    P-335 Plus User’s Guide 3.3.9 WAN MAC Address Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. Table 17 Example of Network Properties for LAN Servers with Fixed IP Addresses Choose an IP address 192.168.1.2-192.168.1.32;...

  • Page 54: Connection Wizard: Step 3: Bandwidth Management

    P-335 Plus User’s Guide Table 18 Wizard Step 2: WAN MAC Address LABEL DESCRIPTION Back Click Back to return to the previous screen. Next Click Next to continue. Exit Click Exit to close the wizard screen without saving. 3.4 Connection Wizard: STEP 3: Bandwidth management Bandwidth management allows you to control the amount of bandwidth going out through the ZyXEL Device’s WAN or LAN port and prioritize the distribution of the bandwidth according...

  • Page 55: Figure 22 Connection Wizard Complete

    P-335 Plus User’s Guide Figure 22 Connection Wizard Complete Well done! You have successfully set up your ZyXEL Device to operate on your network and access the Internet. Chapter 3 Connection Wizard...
  • Page 56 P-335 Plus User’s Guide Chapter 3 Connection Wizard...

  • Page 57: Chapter 4 Wan

    P-335 Plus User’s Guide H A P T E R This chapter describes how to configure WAN settings. 4.1 WAN Overview See the chapter about the connection wizard for more information on the fields in the WAN screens. 4.2 WAN MAC Address The MAC address screen allows users to configure the WAN port's MAC address by either using the factory default or cloning the MAC address from a computer on your LAN.

  • Page 58: Figure 23 Ethernet Encapsulation

    P-335 Plus User’s Guide Figure 23 Ethernet Encapsulation The following table describes the labels in this screen. Table 20 Ethernet Encapsulation LABEL DESCRIPTION Encapsulation You must choose the Ethernet option when the WAN port is used as a regular Ethernet.

  • Page 59: Pppoe Encapsulation

    P-335 Plus User’s Guide Table 20 Ethernet Encapsulation LABEL DESCRIPTION Get automatically Select this option If your ISP did not assign you a fixed IP address. This is the from ISP default selection. Use Fixed IP Select this option If the ISP assigned a fixed IP address.

  • Page 60: Figure 24 Pppoe Encapsulation

    P-335 Plus User’s Guide Operationally, PPPoE saves significant effort for both you and the ISP or carrier, as it requires no specific configuration of the broadband modem at the customer site. By implementing PPPoE directly on the ZyXEL Device (rather than individual computers), the computers on the LAN do not need PPPoE software installed, since the ZyXEL Device does that part of the task.

  • Page 61: Table 21 Pppoe Encapsulation

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 21 PPPoE Encapsulation LABEL DESCRIPTION ISP Parameters for Internet Access Encapsulation The PPP over Ethernet choice is for a dial-up connection using PPPoE. The ZyXEL Device supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband modem (i.e.

  • Page 62: Pptp Encapsulation

    P-335 Plus User’s Guide Table 21 PPPoE Encapsulation LABEL DESCRIPTION Clone the Select Clone the computer's MAC address - IP Address and enter the IP computer’s MAC address of the computer on the LAN whose MAC you are cloning. Once it is...

  • Page 63: Figure 25 Pptp Encapsulation

    P-335 Plus User’s Guide Figure 25 PPTP Encapsulation Chapter 4 WAN...

  • Page 64: Table 22 Pptp Encapsulation

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 22 PPTP Encapsulation LABEL DESCRIPTION ISP Parameters for Internet Access Encapsulation Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of data from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-based networks.

  • Page 65: Advanced Wan Screen

    P-335 Plus User’s Guide Table 22 PPTP Encapsulation LABEL DESCRIPTION First DNS Server Select From ISP if your ISP dynamically assigns DNS server information (and the ZyXEL Device's WAN IP address). The field to the right displays the (read- Second DNS Server only) DNS server IP address that the ISP assigns.

  • Page 66: Table 23 Advanced

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 23 Advanced LABEL DESCRIPTION Multicast Setup Multicast Select IGMP V-1 or IGMP V-2 or None. IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership in a Multicast group - it is not used to carry user data.

  • Page 67: Chapter 5 Lan

    P-335 Plus User’s Guide H A P T E R This chapter describes how to configure LAN settings. 5.1 LAN Overview Local Area Network (LAN) is a shared communication system to which many computers are attached. The LAN screens can help you configure a LAN DHCP server, manage IP addresses, and partition your physical network into logical networks.

  • Page 68: Ip Address And Subnet Mask

    P-335 Plus User’s Guide 5.2.2 IP Address and Subnet Mask Refer to the IP Address and Subnet Mask section in the Connection Wizard chapter for this information. 5.2.3 Multicast Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 recipient) or Broadcast (1 sender - everybody on the network).

  • Page 69: Lan Ip Alias

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 24 LAN IP LABEL DESCRIPTION LAN TCP/IP IP Address Type the IP address of your ZyXEL Device in dotted decimal notation 192.168.1.1 (factory default). IP Subnet Mask The subnet mask specifies the network number portion of an IP address.

  • Page 70: Advanced Lan Screen

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 25 LAN IP Alias LABEL DESCRIPTION IP Alias 1,2 Select the check box to configure another LAN network for the ZyXEL Device. IP Address Enter the IP address of your ZyXEL Device in dotted decimal notation.
  • Page 71 P-335 Plus User’s Guide Table 26 Advanced LAN LABEL DESCRIPTION Allow between LAN Select this check box to forward NetBIOS packets from the LAN to the WAN and WAN and from the WAN to the LAN. If your firewall is enabled with the default policy set to block WAN to LAN traffic, you also need to enable the default WAN to LAN firewall rule that forwards NetBIOS traffic.
  • Page 72 P-335 Plus User’s Guide Chapter 5 LAN...

  • Page 73: Chapter 6 Dhcp Server

    P-335 Plus User’s Guide H A P T E R DHCP Server 6.1 DHCP DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL Device as a DHCP server or disable it.

  • Page 74: Dhcp Server Advanced Screen

    P-335 Plus User’s Guide Table 27 DHCP Server General LABEL DESCRIPTION Apply Click Apply to save your changes back to the ZyXEL Device. Reset Click Reset to begin configuring this screen afresh. 6.3 DHCP Server Advanced Screen This screen allows you to assign IP addresses on the LAN to specific individual computers based on their MAC addresses.

  • Page 75: Client List Screen

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 28 DHCP Server Advanced LABEL DESCRIPTION This is the index number of the static IP table entry (row). MAC Address Type the MAC address (with colons) of a computer on your LAN.

  • Page 76: Figure 32 Client List

    P-335 Plus User’s Guide Figure 32 Client List The following table describes the labels in this screen. Table 29 Client List LABEL DESCRIPTION This is the index number of the host computer. IP Address This field displays the IP address relative to the # field listed above.

  • Page 77: Network Address Translation (Nat)

    P-335 Plus User’s Guide H A P T E R Network Address Translation (NAT) This chapter discusses how to configure NAT on the ZyXEL Device. 7.1 NAT Overview NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a host in a packet.

  • Page 78: Configuring Servers Behind Port Forwarding (Example)

    P-335 Plus User’s Guide 7.2.2 Configuring Servers Behind Port Forwarding (Example) Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the example), port 80 to another (B in the example) and assign a default server IP address of 192.168.1.35 to a third (C in the example).

  • Page 79: Nat Application Screen

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 30 NAT General LABEL DESCRIPTION Network Address Network Address Translation (NAT) allows the translation of an Internet protocol Translation address used within one network (for example a private IP address used in a local network) to a different IP address known within another network (for example a public IP address used on the Internet).

  • Page 80: Figure 35 Nat Application

    P-335 Plus User’s Guide Figure 35 NAT Application The following table describes the labels in this screen. Table 31 NAT Application LABEL DESCRIPTION Game List Update A game list includes the pre-defined service name(s) and port number(s). You can edit and upload it to the ZyXEL Device to replace the existing entries in the second field next to Service Name.

  • Page 81: Game List Example

    P-335 Plus User’s Guide Table 31 NAT Application (continued) LABEL DESCRIPTION Service Name Type a name (of up to 31 printable characters) to identify this rule in the first field next to Service Name. Otherwise, select a predefined service in the second field next to Service Name.

  • Page 82: Trigger Port Forwarding

    P-335 Plus User’s Guide Figure 36 Game List Example version=1 1;name=Battlefield 1942;port=14567,22000,23000-23009,27900,28900 2;name=Call of Duty;port=28960 3;name=Civilization IV;port=2056 4;name=Diablo I and II;port=6112-6119,4000 5;name=Doom 3;port=27666 6;name=F.E.A.R;port=27888 7;name=Final Fantasy XI;port=25,80,110,443,50000-65535 8;name=Guild Wars;port=6112,80 9;name=Half Life;port=6003,7002,27005,27010,27011,27015 10;name=Jedi Knight III: Jedi Academy;port=28060-28062,28070-28081 11;name=Need for Speed: Hot Pursuit 2;port=1230,8511- 8512,27900,28900,61200-61230 12;name=Neverwinter Nights;port=5120-5300,6500,27900,28900...

  • Page 83: Trigger Port Forwarding Example

    P-335 Plus User’s Guide 7.5.1 Trigger Port Forwarding Example The following is an example of trigger port forwarding. Figure 37 Trigger Port Forwarding Process: Example 1 Jane requests a file from the Real Audio server (port 7070). 2 Port 7070 is a “trigger” port and causes the ZyXEL Device to record Jane’s computer IP address.

  • Page 84: Figure 38 Nat Advanced

    P-335 Plus User’s Guide Figure 38 NAT Advanced The following table describes the labels in this screen. Table 32 NAT Advanced LABEL DESCRIPTION Max NAT/Firewall Type a number ranging from 1 to 2048 to limit the number of NAT/firewall sessions Session Per User that a host can create.
  • Page 85 P-335 Plus User’s Guide Table 32 NAT Advanced LABEL DESCRIPTION Incoming Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a particular service. The ZyXEL Device forwards the traffic with this port (or range of ports) to the client computer on the LAN that requested the service.
  • Page 86 P-335 Plus User’s Guide Chapter 7 Network Address Translation (NAT)

  • Page 87: Chapter 8 Dynamic Dns

    P-335 Plus User’s Guide H A P T E R Dynamic DNS 8.1 Dynamic DNS Introduction Dynamic DNS allows you to update your current dynamic IP address with one or many dynamic DNS services so that anyone can contact you (in NetMeeting, CU-SeeMe, etc.). You can also access your FTP server or Web site on your own computer using a domain name (for instance myhost.dhs.org, where myhost is a name of your choice) that will never change...

  • Page 88: Figure 39 Dynamic Dns

    P-335 Plus User’s Guide Figure 39 Dynamic DNS The following table describes the labels in this screen. Table 33 Dynamic DNS LABEL DESCRIPTION Enable Dynamic DNS Select this check box to use dynamic DNS. Service Provider Select the name of your Dynamic DNS service provider.

  • Page 89: Chapter 9 Firewall

    P-335 Plus User’s Guide H A P T E R Firewall This chapter gives some background information on firewalls and explains how to get started with the ZyXEL Device firewall. 9.1 Introduction to Firewall 9.1.1 What is a Firewall? Originally, the term firewall referred to a construction technique designed to prevent the spread of fire from one room to another.

  • Page 90: Guidelines For Enhancing Security With Your Firewall

    P-335 Plus User’s Guide The ZyXEL Device is installed between the LAN and a broadband modem connecting to the Internet. This allows it to act as a secure gateway for all data passing between the Internet and the LAN. The ZyXEL Device has one Ethernet WAN port and four Ethernet LAN ports, which are used to physically separate the network into two areas.The WAN (Wide Area Network) port...

  • Page 91: Triangle Routes And Ip Alias

    P-335 Plus User’s Guide 9.2.1 Triangle Routes and IP Alias You can use IP alias instead of allowing triangle routes. IP Alias allow you to partition your network into logical sections over the same interface. By putting your LAN and Gateway A in different subnets, all returning network traffic must pass through the ZyXEL Device to your LAN.

  • Page 92: Services Screen

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 34 Firewall General LABEL DESCRIPTION Enable Firewall Select this check box to activate the firewall. The ZyXEL Device performs access control and protects against Denial of Service (DoS) attacks when the firewall is activated.

  • Page 93: Figure 42 Services

    P-335 Plus User’s Guide Figure 42 Services The following table describes the labels in this screen. Table 35 Firewall Services LABEL DESCRIPTION ICMP Internet Control Message Protocol is a message control and error-reporting protocol between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP) datagrams, but the messages are processed by the TCP/IP software and directly apparent to the application user.
  • Page 94 P-335 Plus User’s Guide Table 35 Firewall Services LABEL DESCRIPTION Do not respond to Select this option to prevent hackers from finding the ZyXEL Device by probing for requests for unused ports. If you select this option, the ZyXEL Device will not respond to port...

  • Page 95: Chapter 10 Content Filtering

    P-335 Plus User’s Guide H A P T E R Content Filtering This chapter provides a brief overview of content filtering using the embedded web GUI. 10.1 Introduction to Content Filtering Internet content filtering allows you to create and enforce Internet access policies tailored to their needs.

  • Page 96: Figure 43 Content Filter: Filter

    P-335 Plus User’s Guide Figure 43 Content Filter: Filter The following table describes the labels in this screen. Table 36 Content Filter: Filter LABEL DESCRIPTION Trusted Computer To enable this feature, type an IP address of any one of the computers in your IP Address network that you want to have as a trusted computer.

  • Page 97: Schedule

    P-335 Plus User’s Guide Table 36 Content Filter: Filter LABEL DESCRIPTION Keyword Type a keyword in this field. You may use any character (up to 64 characters). Wildcards are not allowed. You can also enter a numerical IP address. Keyword List This list displays the keywords already added.

  • Page 98: Customizing Keyword Blocking Url Checking

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 37 Content Filter: Schedule LABEL DESCRIPTION Day to Block Select check boxes for the days that you want the ZyXEL Device to perform content filtering. Select the Everyday check box to have content filtering turned on all days of the week.

  • Page 99: File Name Url Checking

    P-335 Plus User’s Guide 10.6.3 File Name URL Checking Filename URL checking has the ZyXEL Device check all of the characters in the URL. For example, filename URL checking searches for keywords within the URL www.zyxel.com.tw/news/pressroom.php. Use the ip urlfilter customize actionFlags 8 [disable | enable] command to extend (or not extend) the keyword blocking search to include the URL's complete filename.
  • Page 100 P-335 Plus User’s Guide Chapter 10 Content Filtering...

  • Page 101: Chapter 11 Static Route Screens

    P-335 Plus User’s Guide H A P T E R Static Route Screens This chapter shows you how to configure static routes for your ZyXEL Device. 11.1 Static Route Overview Each remote node specifies only the network to which the gateway is directly connected, and the ZyXEL Device has no knowledge of the networks beyond.

  • Page 102: Ip Static Route Screen

    P-335 Plus User’s Guide 11.2 IP Static Route Screen Click Management > Static Route to open the IP Static Route screen. The following screen displays. Figure 46 IP Static Route The following table describes the labels in this screen. Table 38 IP Static Route...

  • Page 103: Static Route Setup Screen

    P-335 Plus User’s Guide 11.2.1 Static Route Setup Screen To edit a static route, click the edit icon under Modify. The following screen displays. Fill in the required information for each static route. Figure 47 Static Route Setup The following table describes the labels in this screen.
  • Page 104 P-335 Plus User’s Guide Chapter 11 Static Route Screens...

  • Page 105: Chapter 12 Bandwidth Management

    P-335 Plus User’s Guide H A P T E R Bandwidth Management This chapter contains information about configuring bandwidth management, editing rules and viewing the ZyXEL Device’s bandwidth management logs. 12.1 Bandwidth Management Overview ZyXEL’s Bandwidth Management allows you to specify bandwidth management rules based on an application and/or subnet.

  • Page 106: Application And Subnet-Based Bandwidth Management

    P-335 Plus User’s Guide The following figure shows LAN subnets. You could configure one bandwidth class for subnet A and another for subnet B. Figure 48 Subnet-based Bandwidth Management Example 12.4 Application and Subnet-based Bandwidth Management You could also create bandwidth classes based on a combination of a subnet and an application.

  • Page 107: Bandwidth Management Priorities

    P-335 Plus User’s Guide 12.5 Bandwidth Management Priorities The following table describes the priorities that you can apply to traffic that the ZyXEL Device forwards out through an interface. Table 41 Bandwidth Management Priorities PRIORITY LEVELS: TRAFFIC WITH A HIGHER PRIORITY GETS THROUGH FASTER WHILE TRAFFIC WITH A LOWER PRIORITY IS DROPPED IF THE NETWORK IS CONGESTED.

  • Page 108: Services And Port Numbers

    P-335 Plus User’s Guide Table 42 Media Bandwidth Management Setup: Services (continued) SERVICE DESCRIPTION MSN Webcam MSN messenger allows you to chat online and send instant messages. If you use MSN messenger and also have a webcam, you can send your image/photo in real-...
  • Page 109 P-335 Plus User’s Guide Table 43 Commonly Used Services SERVICE DESCRIPTION IPSEC_TUNNEL(ESP:0) The IPSEC ESP (Encapsulation Security Protocol) tunneling protocol uses this service. IRC(TCP/UDP:6667) This is another popular Internet chat program. MSN Messenger(TCP:1863) Microsoft Networks’ messenger service uses this protocol.

  • Page 110: Default Bandwidth Management Classes And Priorities

    P-335 Plus User’s Guide Table 43 Commonly Used Services SERVICE DESCRIPTION TELNET(TCP:23) Telnet is the login and terminal emulation protocol common on the Internet and in UNIX environments. It operates over TCP/IP networks. Its primary function is to allow users to log into remote host systems.

  • Page 111: Bandwidth Management General Configuration

    P-335 Plus User’s Guide 12.8 Bandwidth Management General Configuration Click Management > Bandwidth MGMT to open the bandwidth management General screen. Figure 49 Bandwidth Management: General The following table describes the labels in this screen. Table 45 Bandwidth Management: General...

  • Page 112: Bandwidth Management Advanced Configuration

    P-335 Plus User’s Guide 12.9 Bandwidth Management Advanced Configuration Click Management > Bandwidth MGMT > Advanced to open the bandwidth management Advanced screen. Figure 50 Bandwidth Management: Advanced Chapter 12 Bandwidth Management...

  • Page 113: Table 46 Bandwidth Management: Advanced

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 46 Bandwidth Management: Advanced LABEL DESCRIPTION Upstream Enter the amount of bandwidth in kbps (2 to 100,000) that you want to allocate for Bandwidth (kbps) traffic. 20 kbps to 20,000 kbps is recommended.

  • Page 114: Rule Configuration With The Pre-Defined Service

    P-335 Plus User’s Guide 12.9.1 Rule Configuration with the Pre-defined Service To edit a bandwidth management rule for the pre-defined service in the ZyXEL Device, click the Edit icon in the Application List table of the Advanced screen. The following screen displays.

  • Page 115: Rule Configuration With The User-Defined Service

    P-335 Plus User’s Guide 12.9.2 Rule Configuration with the User-defined Service In addition to the pre-defined services, if you want to edit a bandwidth management rule for other applications and/or subnets, click the Edit icon in the User-defined Service table of the Advanced screen.

  • Page 116: Bandwidth Management Monitor

    P-335 Plus User’s Guide 12.10 Bandwidth Management Monitor Click Management > Bandwidth MGMT > Monitor to open the bandwidth management Monitor screen. View the bandwidth usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over the bandwidth budget for each rule. The gray section of the bar represents the percentage of unused bandwidth and the blue color represents the percentage of bandwidth in use.

  • Page 117: Remote Management Screens

    P-335 Plus User’s Guide H A P T E R Remote Management Screens This chapter provides information on the Remote Management screens. 13.1 Remote Management Overview Remote management allows you to determine which services/protocols can access which ZyXEL Device interface (if any) from which computers.

  • Page 118: Remote Management And Nat

    P-335 Plus User’s Guide 3 There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time. 4 There is a firewall rule that blocks it.

  • Page 119: Telnet

    P-335 Plus User’s Guide Table 49 WWW Remote Management LABEL DESCRIPTION Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the Address ZyXEL Device using this service. Select All to allow any computer to access the ZyXEL Device using this service.

  • Page 120: Telnet Screen

    P-335 Plus User’s Guide 13.4 Telnet Screen To change your ZyXEL Device’s Telnet settings, click Management > Remote MGMT > Telnet. The following screen displays. Figure 56 Telnet Remote Management The following table describes the labels in this screen. Table 50 Telnet Remote Management...

  • Page 121: Dns Screen

    P-335 Plus User’s Guide To change your ZyXEL Device’s FTP settings, click Management > Remote MGMT > FTP. The screen appears as shown. Figure 57 FTP Remote Management The following table describes the labels in this screen. Table 51 FTP Remote Management...

  • Page 122: Figure 58 Dns Remote Management

    P-335 Plus User’s Guide To change your ZyXEL Device’s DNS settings, click Management > Remote MGMT > DNS. The screen appears as shown. Figure 58 DNS Remote Management The following table describes the labels in this screen. Table 52 DNS Remote Management...

  • Page 123: Chapter 14 Upnp

    P-335 Plus User’s Guide H A P T E R UP N P This chapter introduces the Universal Plug and Play feature. 14.1 Universal Plug and Play Overview Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices.

  • Page 124: Upnp And Zyxel

    P-335 Plus User’s Guide When a UPnP device joins a network, it announces its presence with a multicast message. For security reasons, the ZyXEL Device allows multicast messages on the LAN only. All UPnP-enabled devices may communicate freely with each other without additional configuration.

  • Page 125: Installing Upnp In Windows Example

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 53 Configuring UPnP LABEL DESCRIPTION Enable the Universal Select this checkbox to activate UPnP. Be aware that anyone could use a Plug and Play (UPnP) UPnP application to open the web configurator's login screen without entering...

  • Page 126: Installing Upnp In Windows Xp

    P-335 Plus User’s Guide 1 Click Start and Control Panel. Double- click Add/Remove Programs. 2 Click on the Windows Setup tab and select Communication in the Components selection box. Click Details. 3 In the Communications window, select the Universal Plug and Play check box in the Components selection box.

  • Page 127: Using Upnp In Windows Xp Example

    P-335 Plus User’s Guide 4 Select Networking Service in the Components selection box and click Details. 5 In the Networking Services window, select the Universal Plug and Play check box. 6 Click OK to go back to the Windows Optional Networking Component Wizard window and click Next.

  • Page 128: Web Configurator Easy Access

    P-335 Plus User’s Guide 3 In the Internet Connection Properties window, click Settings to see the port mappings that were automatically created. 4 You may edit or delete the port mappings or click Add to manually add port mappings. Note: When the UPnP-enabled device is disconnected from your computer, all port mappings will be deleted automatically.

  • Page 129: Web Configurator Easy Access

    P-335 Plus User’s Guide 1 Click Start and then Control Panel. 2 Double-click Network Connections. 3 Select My Network Places under Other Places. 4 An icon with the description for each UPnP-enabled device displays under Local Network. 5 Right-click the icon for your ZyXEL device and select Invoke.
  • Page 130 P-335 Plus User’s Guide 1 Click Start and then Control Panel. 2 Double-click Network Connections. 3 Select My Network Places under Other Places. 4 An icon with the description for each UPnP-enabled device displays under Local Network. 5 Right-click the icon for your ZyXEL device and select Invoke.

  • Page 131: Chapter 15 Print Server

    P-335 Plus User’s Guide H A P T E R Print Server This chapter discusses how to configure the print server on the ZyXEL Device. 15.1 Print Server Overview A print server is a device or software that provides users on a network with shared access to one or more printers.

  • Page 132: Print Server Screen

    P-335 Plus User’s Guide 15.3 Print Server Screen Click the Print Server link under Management to display the Print Server screen. Figure 60 Configuring Print Server The following table describes the labels in this screen. Table 54 Configuring Print Server...

  • Page 133: Print Server Driver Setup

    P-335 Plus User’s Guide H A P T E R Print Server Driver Setup This chapter shows you how to set up a print server driver for a Windows or Macintosh computer. 16.1 Installation Requirements To install the print server driver you will need the following requirements •...

  • Page 134: Print Server Driver Setup Wizard

    P-335 Plus User’s Guide 3 You can either • use the Setup Wizard for Windows NT/2000/XP to install the print monitor and open the setup wizard automatically • use the Setup Wizard for Windows 98/ME/NT/2000/XP to install the print monitor in a specified file location and open the setup wizard (by running the PSWizard.exe file in the...

  • Page 135: Figure 63 Network Print Server Setup Wizard: Welcome

    P-335 Plus User’s Guide 1 The Welcome screen displays. Click Next to continue. Figure 63 Network Print Server Setup Wizard: Welcome 2 The Select A Print Server screen displays. The wizard automatically detects whether or not a print server is connected to your computer. Make sure that your ZyXEL Device is correctly connected and a compatible USB printer is connected to the ZyXEL Device.

  • Page 136: Figure 65 Network Print Server Setup Wizard: Change Settings

    P-335 Plus User’s Guide 3 The Change Settings screen displays. If you want to change your print server’s IP address, select Yes, I want to change settings, leave the Password field blank and click Next. The print server’s IP address is the ZyXEL Device’s IP address. Since the wizard detects your print server’s IP address automatically, it’s recommended that you select...

  • Page 137: Figure 66 Network Print Server Setup Wizard: Select A Printer

    P-335 Plus User’s Guide 4 Select the USB printer that is connected to the ZyXEL Device if you have added it on your computer already and click Next. If your printer is not listed, click Add New Printer and see Section 16.2.2 on page 139...

  • Page 138: Figure 67 Network Print Server Setup Wizard: Summary

    P-335 Plus User’s Guide 5 A Summary screen displays. Check your settings and click Next to continue. Figure 67 Network Print Server Setup Wizard: Summary 6 Click Finish to save and close your Network Print Server Setup Wizard. Your print server driver setup is complete.

  • Page 139: Adding A New Printer

    P-335 Plus User’s Guide 16.2.2 Adding a New Printer 1 Click Add New Printer in the Network Print Server Setup Wizard: Select A Printer screen (see Figure 66 on page 137). A help dialog box pops up to guide you through the adding printer process.

  • Page 140: Figure 71 Add Printer Wizard: Local Or Network Printer

    P-335 Plus User’s Guide 3 Select Local printer and click Next. Figure 71 Add Printer Wizard: Local or Network Printer 4 Select an LPT (Line Printing Terminal) port (a parallel port) as the computer interface for the USB printer. Figure 72 Add Printer Wizard: Select the Printer Port...

  • Page 141: Figure 73 Add Printer Wizard: Printer Driver

    P-335 Plus User’s Guide 5 Select the make of the printer that you want to connect to the print server in the Manufacturers list of printers. 6 Select the printer model from the list of Printers. 7 If your printer is not displayed in the list of Printers, you can insert the printer driver installation CD/disk or download the driver file to your computer, click Have Disk…...

  • Page 142: Figure 75 Add Printer Wizard: Name Your Printer

    P-335 Plus User’s Guide 10 Type a name to identify the printer and then click Next to continue. Figure 75 Add Printer Wizard: Name Your Printer 11 The ZyXEL Device is a print server itself and you do not need to have your computer act as a print server by sharing the printer with other users in the same network;...

  • Page 143: Macintosh Os X

    P-335 Plus User’s Guide 12 Select Yes and then click the Next button if you want to print a test page. A pop-up screen displays to ask if the test page printed correctly. Otherwise select No and then click Next to continue.

  • Page 144: Figure 79 Macintosh Hd

    P-335 Plus User’s Guide 2 On your desktop, double-click the Macintosh HD icon to open the Macintosh HD window. Figure 79 Macintosh HD 3 Double-click the Applications folder. Macintosh HD folder Figure 80 4 Double-click the Utilities folder. Figure 81 Applications Folder 5 Double-click the Print Center icon.

  • Page 145: Figure 83 Printer List Folder

    P-335 Plus User’s Guide 6 Click the Add icon at the top of the screen. Figure 83 Printer List Folder 7 Set up your printer in the Printer List configuration screen. Select IP Printing from the drop-down list box. 8 In the Printer’s Address field, type the IP address of your ZyXEL Device.

  • Page 146: Figure 85 Printer Model

    P-335 Plus User’s Guide 12 Click Add to select a printer model, save and close the Printer List configuration screen. Figure 85 Printer Model 13 The Name LP1 on 192.168.1.1 displays in the Printer List field. The default printer Name displays in bold type.

  • Page 147: Chapter 17 System

    P-335 Plus User’s Guide H A P T E R System This chapter provides information on the System screens. 17.1 System Overview See the chapter about wizard setup for more information on the next few screens. 17.2 System General Screen Click Maintenance >...

  • Page 148: Time Setting Screen

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 55 System General LABEL DESCRIPTION System Name System Name is a unique name to identify the ZyXEL Device in an Ethernet network. It is recommended you enter your computer’s “Computer name” in this field (see the chapter about wizard setup for how to find your computer’s name).

  • Page 149: Figure 88 Time Setting

    P-335 Plus User’s Guide Figure 88 Time Setting The following table describes the labels in this screen. Table 56 Time Setting LABEL DESCRIPTION Current Time and Date Current Time This field displays the time of your ZyXEL Device. Each time you reload this page, the ZyXEL Device synchronizes the time with the time server.
  • Page 150 P-335 Plus User’s Guide Table 56 Time Setting LABEL DESCRIPTION New Date This field displays the last updated date from the time server or the last date configured manually. (yyyy/mm/dd) When you set Time and Date Setup to Manual, enter the new date in this field and then click Apply.

  • Page 151: Chapter 18 Logs

    P-335 Plus User’s Guide H A P T E R Logs This chapter contains information about configuring general log settings and viewing the ZyXEL Device’s logs. Refer to the appendices for example log message explanations. 18.1 View Log The web configurator allows you to look at all of the ZyXEL Device’s logs in one location.

  • Page 152: Log Settings

    P-335 Plus User’s Guide The following table describes the labels in this screen. Table 57 View Logs LABEL DESCRIPTION Display The categories that you select in the Log Settings page (see Section 18.2 on page 152) display in the drop-down list box.

  • Page 153: Figure 90 Log Settings

    P-335 Plus User’s Guide Figure 90 Log Settings The following table describes the labels in this screen. Table 58 Log Settings LABEL DESCRIPTION E-mail Log Settings Mail Server Enter the server name or the IP address of the mail server for the e-mail addresses specified below.
  • Page 154 P-335 Plus User’s Guide Table 58 Log Settings LABEL DESCRIPTION Send Alerts To Alerts are real-time notifications that are sent as soon as an event, such as a DoS attack, system error, or forbidden web access attempt occurs. Enter the E- mail address where the alert messages will be sent.

  • Page 155: Chapter 19 Tools

    P-335 Plus User’s Guide H A P T E R Tools This chapter shows you how to upload a new firmware, upload or save backup configuration files and restart the ZyXEL Device. 19.1 Firmware Upload Screen Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a "*.bin"...

  • Page 156: Configuration Screen

    P-335 Plus User’s Guide After you see the Firmware Upload In Process screen, wait two minutes before logging into the ZyXEL Device again. Figure 92 Upload Warning The ZyXEL Device automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

  • Page 157: Backup Configuration

    P-335 Plus User’s Guide Click Maintenance > Tools > Configuration. Information related to factory defaults, backup configuration, and restoring configuration appears as shown next. Figure 95 Configuration 19.2.1 Backup Configuration Backup configuration allows you to back up (save) the ZyXEL Device’s current configuration to a file on your computer.

  • Page 158: Back To Factory Defaults

    P-335 Plus User’s Guide After you see a “configuration upload successful” screen, you must then wait one minute before logging into the ZyXEL Device again. Figure 96 Configuration Restore Successful The ZyXEL Device automatically restarts in this time causing a temporary network disconnect.

  • Page 159: Restart Screen

    P-335 Plus User’s Guide You can also press the RESET button on the rear panel to reset the factory defaults of your ZyXEL Device. Refer to the chapter about introducing the web configurator for more information on the RESET button.
  • Page 160 P-335 Plus User’s Guide Chapter 19 Tools...

  • Page 161: Chapter 20 Configuration Mode

    P-335 Plus User’s Guide H A P T E R Configuration Mode Click Maintenance > Config Mode to open the following screen. This screen allows you to hide or display the advanced screens of some feaures or the advanced features, such as MAC filter or static route.
  • Page 162 P-335 Plus User’s Guide Chapter 20 Configuration Mode...

  • Page 163: Chapter 21 Troubleshooting

    P-335 Plus User’s Guide H A P T E R Troubleshooting This chapter covers potential problems and the corresponding remedies. 21.1 Problems Starting Up the ZyXEL Device Table 62 Troubleshooting Starting Up Your ZyXEL Device PROBLEM CORRECTIVE ACTION None of the Make sure that the ZyXEL Device’s power adaptor is connected to the ZyXEL Device...

  • Page 164: Problems With The Wan

    P-335 Plus User’s Guide 21.3 Problems with the WAN Table 64 Troubleshooting the WAN PROBLEM CORRECTIVE ACTION The WAN LED is Check the connections between the ZyXEL Device WAN port and the cable/DSL off. modem or ethernet jack. Check whether your cable/DSL device requires a crossover or straight-through cable.

  • Page 165: Problems With The Password

    P-335 Plus User’s Guide Table 65 Troubleshooting Restricted Web Pages and Keyword Blocking PROBLEM CORRECTIVE ACTION Parental Restart the device to clear the cache. Control is The content filter server may be unavailable. The View Logs screen can display configured content filtering log messages.

  • Page 166: Problems With Remote Management

    P-335 Plus User’s Guide 21.7 Problems with Remote Management Table 68 Troubleshooting Telnet PROBLEM CORRECTIVE ACTION Cannot access the Refer to Chapter 13 on page 117 for scenarios when remote management may ZyXEL Device from not be possible. the LAN or WAN.

  • Page 167: Internet Explorer Pop-Up Blockers

    P-335 Plus User’s Guide Note: Internet Explorer 6 screens are used here. Screens for other Internet Explorer versions may vary. 21.8.1.1 Internet Explorer Pop-up Blockers You may have to disable pop-up blocking to log into your device. Either disable pop-up blocking (enabled by default in Windows XP SP (Service Pack) 2) or allow pop-up blocking and create an exception for your device’s IP address.

  • Page 168: Figure 102 Internet Options

    P-335 Plus User’s Guide Figure 102 Internet Options 3 Click Apply to save this setting. 21.8.1.1.2 Enable pop-up Blockers with Exceptions Alternatively, if you only want to allow pop-up windows from your device, see the following steps. 1 In Internet Explorer, select Tools, Internet Options and then the Privacy tab.

  • Page 169: Figure 103 Internet Options

    P-335 Plus User’s Guide Figure 103 Internet Options 3 Type the IP address of your device (the web page that you do not want to have blocked) with the prefix “http://”. For example, http://192.168.1.1. 4 Click Add to move the IP address to the list of Allowed sites.

  • Page 170: Javascripts

    P-335 Plus User’s Guide Figure 104 Pop-up Blocker Settings 5 Click Close to return to the Privacy screen. 6 Click Apply to save this setting. 21.8.1.2 JavaScripts If pages of the web configurator do not display properly in Internet Explorer, check that JavaScripts are allowed.

  • Page 171: Figure 105 Internet Options

    P-335 Plus User’s Guide Figure 105 Internet Options 2 Click the Custom Level... button. 3 Scroll down to Scripting. 4 Under Active scripting make sure that Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default).

  • Page 172: Java Permissions

    P-335 Plus User’s Guide Figure 106 Security Settings - Java Scripting 21.8.1.3 Java Permissions 1 From Internet Explorer, click Tools, Internet Options and then the Security tab. 2 Click the Custom Level... button. 3 Scroll down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected.

  • Page 173: Figure 107 Security Settings - Java

    P-335 Plus User’s Guide Figure 107 Security Settings - Java 21.8.1.3.1 JAVA (Sun) 1 From Internet Explorer, click Tools, Internet Options and then the Advanced tab. 2 Make sure that Use Java 2 for <applet> under Java (Sun) is selected.

  • Page 174: Activex Controls In Internet Explorer

    P-335 Plus User’s Guide Figure 108 Java (Sun) 21.8.2 ActiveX Controls in Internet Explorer If ActiveX is disabled, you will not be able to download ActiveX controls or to use Trend Micro Security Serivces. Make sure that ActiveX controls are allowed in Internet Explorer.

  • Page 175: Figure 109 Internet Options Security

    P-335 Plus User’s Guide Figure 109 Internet Options Security 3 Scroll down to ActiveX controls and plug-ins. 4 Under Download signed ActiveX controls select the Prompt radio button. 5 Under Run ActiveX controls and plug-ins make sure the Enable radio button is selected.

  • Page 176: Figure 110 Security Setting Activex Controls

    P-335 Plus User’s Guide Figure 110 Security Setting ActiveX Controls Chapter 21 Troubleshooting...

  • Page 177: Product Specifications

    P-335 Plus User’s Guide P P E N D I X Product Specifications The following table is a summary of other features available. Table 70 Hardware Features Default IP Address 192.168.1.1 Default Subnet Mask 255.255.255.0 (24 bits) Default Password 1234 DHCP Pool 192.168.1.33 to 192.168.1.64...
  • Page 178 P-335 Plus User’s Guide Table 71 Firmware Features FEATURE DESCRIPTION Port Forwarding If you have a server (mail or web server for example) on your network, then use this feature to let people access it from the Internet. DHCP (Dynamic Host...

  • Page 179: Print Server Specifications

    P-335 Plus User’s Guide P P E N D I X Print Server Specifications This appendix provides details on the print server interface and system requirements. Table 72 Print Server Interface PRINT SERVER INTERFACE USB 1.1 (full speed) - compliant port, 1.5Mbps (low speed) and 12Mbps (full speed) data transmission rates.

  • Page 180: Table 74 Compatible Usb Printers

    P-335 Plus User’s Guide ZyXEL Device Print Server Compatible USB Printers The following is a list of USB printer models compatible with the ZyXEL Device print server. Table 74 Compatible USB Printers BRAND MODEL TYPE REMARK BJ F9000 CANON Inkjet...
  • Page 181 P-335 Plus User’s Guide Table 74 Compatible USB Printers BRAND MODEL TYPE REMARK MP-130 CANON Aculaser C1900 EPSON Color Laser EPL-6100 EPSON Laser Disable bi-directional support on printer. Stylus C20 EPSON Inkjet Disable bi-directional support on printer. Stylus C20SX EPSON Inkjet Disable bi-directional support on printer.
  • Page 182 P-335 Plus User’s Guide Table 74 Compatible USB Printers BRAND MODEL TYPE REMARK DeskJet 5550 Inkjet DeskJet 810C Inkjet DeskJet 845C Inkjet DeskJet 920C Inkjet Deskjet 1180c Inkjet DeskJet 930C Inkjet LaserJet 1200 Laser Disable bi-directional support on printer. LaserJet 1220 Laser Disable bi-directional support on printer.
  • Page 183 P-335 Plus User’s Guide Table 74 Compatible USB Printers BRAND MODEL TYPE REMARK FS-1920 KYOCERA Laser KONICA PagePro 1350W Laser MINOLTA C750 LEXMARK Color Laser E210 LEXMARK Laser E322 LEXMARK Laser T420 LEXMARK Laser T620 LEXMARK Laser W812 LEXMARK Laser...
  • Page 184 P-335 Plus User’s Guide Appendix B Print Server Specifications...

  • Page 185: Setting Up Your Computer's Ip Address

    P-335 Plus User’s Guide P P E N D I X Setting up Your Computer’s IP Address All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed. Windows 95/98/Me/NT/2000/XP, Macintosh OS 7 and later operating systems and all versions of UNIX/LINUX include the software components you need to install and use TCP/ IP on your computer.

  • Page 186: Figure 111 Windows 95/98/Me: Network: Configuration

    P-335 Plus User’s Guide Figure 111 WIndows 95/98/Me: Network: Configuration Installing Components The Network window Configuration tab displays a list of installed components. You need a network adapter, the TCP/IP protocol and Client for Microsoft Networks. If you need the adapter: 1 In the Network window, click Add.

  • Page 187: Figure 112 Windows 95/98/Me: Tcp/Ip Properties: Ip Address

    P-335 Plus User’s Guide 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click 5 Restart your computer so the changes you made take effect. Configuring 1 In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties 2 Click the IP Address tab.

  • Page 188: Figure 113 Windows 95/98/Me: Tcp/Ip Properties: Dns Configuration

    P-335 Plus User’s Guide Figure 113 Windows 95/98/Me: TCP/IP Properties: DNS Configuration 4 Click the Gateway tab. • If you do not know your gateway’s IP address, remove previously installed gateways. • If you have a gateway IP address, type it in the New gateway field and click Add.

  • Page 189: Figure 114 Windows Xp: Start Menu

    P-335 Plus User’s Guide Figure 114 Windows XP: Start Menu 2 In the Control Panel, double-click Network Connections (Network and Dial-up Connections in Windows 2000/NT). Figure 115 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties.

  • Page 190: Figure 116 Windows Xp: Control Panel: Network Connections: Properties

    P-335 Plus User’s Guide Figure 116 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and then click Properties. Figure 117 Windows XP: Local Area Connection Properties 5 The Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP).

  • Page 191: Figure 118 Windows Xp: Internet Protocol (Tcp/Ip) Properties

    P-335 Plus User’s Guide • If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. • Click Advanced. Figure 118 Windows XP: Internet Protocol (TCP/IP) Properties 6 If you do not know your gateway's IP address, remove any previously installed gateways in the IP Settings tab and click OK.

  • Page 192: Figure 119 Windows Xp: Advanced Tcp/Ip Properties

    P-335 Plus User’s Guide Figure 119 Windows XP: Advanced TCP/IP Properties 7 In the Internet Protocol TCP/IP Properties window (the General tab in Windows XP): • Click Obtain DNS server address automatically if you do not know your DNS server IP address(es).

  • Page 193: Figure 120 Windows Xp: Internet Protocol (Tcp/Ip) Properties

    P-335 Plus User’s Guide Figure 120 Windows XP: Internet Protocol (TCP/IP) Properties 8 Click OK to close the Internet Protocol (TCP/IP) Properties window. 9 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window. 10 Close the Network Connections window (Network and Dial-up Connections in Windows 2000/NT).

  • Page 194: Figure 121 Macintosh Os 8/9: Apple Menu

    P-335 Plus User’s Guide Figure 121 Macintosh OS 8/9: Apple Menu 2 Select Ethernet built-in from the Connect via list. Figure 122 Macintosh OS 8/9: TCP/IP 3 For dynamically assigned settings, select Using DHCP Server from the Configure: list. Appendix C Setting up Your Computer’s IP Address...

  • Page 195: Figure 123 Macintosh Os X: Apple Menu

    P-335 Plus User’s Guide 4 For statically assigned settings, do the following: • From the Configure box, select Manually. • Type your IP address in the IP Address box. • Type your subnet mask in the Subnet mask box. •...

  • Page 196: Figure 124 Macintosh Os X: Network

    P-335 Plus User’s Guide Figure 124 Macintosh OS X: Network 4 For statically assigned settings, do the following: • From the Configure box, select Manually. • Type your IP address in the IP Address box. • Type your subnet mask in the Subnet mask box.

  • Page 197: Figure 125 Red Hat 9.0: Kde: Network Configuration: Devices

    P-335 Plus User’s Guide Note: Make sure you are logged in as the root administrator. Using the K Desktop Environment (KDE) Follow the steps below to configure your computer IP address using the KDE. 1 Click the Red Hat button (located on the bottom left corner), select System Setting and click Network.

  • Page 198: Figure 127 Red Hat 9.0: Kde: Network Configuration: Dns

    P-335 Plus User’s Guide • If you have a dynamic IP address click Automatically obtain IP address settings with and select dhcp from the drop down list. • If you have a static IP address click Statically set IP Addresses and fill in the Address, Subnet mask, and Default Gateway Address fields.

  • Page 199: Figure 129 Red Hat 9.0: Dynamic Ip Address Setting In Ifconfig-Eth0

    P-335 Plus User’s Guide 1 Assuming that you have only one network card on the computer, locate the ifconfig- configuration file (where is the name of the Ethernet card). Open the eth0 eth0 configuration file with any plain text editor.

  • Page 200: Figure 132 Red Hat 9.0: Restart Ethernet Card

    P-335 Plus User’s Guide Figure 132 Red Hat 9.0: Restart Ethernet Card [root@localhost init.d]# network restart Shutting down interface eth0: [OK] Shutting down loopback interface: [OK] Setting network parameters: [OK] Bringing up loopback interface: [OK] Bringing up interface eth0: [OK]...

  • Page 201: Ip Addresses And Subnetting

    P-335 Plus User’s Guide P P E N D I X IP Addresses and Subnetting This appendix introduces IP addresses, IP address classes and subnet masks. You use subnet masks to subdivide a network into smaller logical networks. Introduction to IP Addresses An IP address has two parts: the network number and the host ID.

  • Page 202: Table 75 Classes Of Ip Addresses

    P-335 Plus User’s Guide The following table shows the network number and host ID arrangement for classes A, B and Table 75 Classes of IP Addresses IP ADDRESS OCTET 1 OCTET 2 OCTET 3 OCTET 4 Class A Network number...

  • Page 203: Table 77 "Natural" Masks

    P-335 Plus User’s Guide Subnet Masks A subnet mask is used to determine which bits are part of the network number, and which bits are part of the host ID (using a logical AND operation). A subnet mask has 32 bits. If a bit in the subnet mask is a “1” then the corresponding bit in the IP address is part of the network number.

  • Page 204: Table 79 Two Subnets Example

    P-335 Plus User’s Guide Table 78 Alternative Subnet Mask Notation (continued) SUBNET MASK SUBNET MASK “1” BITS LAST OCTET BIT VALUE DECIMAL 255.255.255.240 1111 0000 255.255.255.248 1111 1000 255.255.255.252 1111 1100 The first mask shown is the class “C” natural mask. Normally if no mask is specified it is understood that the natural mask is being used.

  • Page 205: Table 80 Subnet 1

    P-335 Plus User’s Guide Table 80 Subnet 1 (continued) LAST OCTET BIT IP/SUBNET MASK NETWORK NUMBER VALUE Subnet Address: 192.168.1.0 Lowest Host ID: 192.168.1.1 Broadcast Address: Highest Host ID: 192.168.1.126 192.168.1.127 Table 81 Subnet 2 IP/SUBNET MASK NETWORK NUMBER LAST OCTET BIT VALUE IP Address 192.168.1.

  • Page 206: Table 83 Subnet 2

    P-335 Plus User’s Guide Table 82 Subnet 1 (continued) LAST OCTET BIT IP/SUBNET MASK NETWORK NUMBER VALUE Subnet Address: 192.168.1.0 Lowest Host ID: 192.168.1.1 Broadcast Address: Highest Host ID: 192.168.1.62 192.168.1.63 Table 83 Subnet 2 LAST OCTET BIT IP/SUBNET MASK...

  • Page 207: Table 86 Eight Subnets

    P-335 Plus User’s Guide The following table shows class C IP address last octet values for each subnet. Table 86 Eight Subnets BROADCAST SUBNET SUBNET ADDRESS FIRST ADDRESS LAST ADDRESS ADDRESS The following table is a summary for class “C” subnet planning.

  • Page 208: Table 88 Class B Subnet Planning

    P-335 Plus User’s Guide The following table is a summary for class “B” subnet planning. Table 88 Class B Subnet Planning NO. “BORROWED” HOST NO. HOSTS PER SUBNET MASK NO. SUBNETS BITS SUBNET 255.255.128.0 (/17) 32766 255.255.192.0 (/18) 16382 255.255.224.0 (/19) 8190 255.255.240.0 (/20)

  • Page 209: Appendix E Command Interpreter

    P-335 Plus User’s Guide Appendix E Command Interpreter The following describes how to use the command interpreter. See the included disk or zyxel.com for more detailed information on these commands. Note: Use of undocumented commands or misconfiguration can damage the unit and possibly render it unusable.
  • Page 210 P-335 Plus User’s Guide Appendix E Command Interpreter...

  • Page 211: Appendix F Log Descriptions

    P-335 Plus User’s Guide P P E N D I X Log Descriptions This appendix provides descriptions of example log messages. Table 89 System Maintenance Logs LOG MESSAGE DESCRIPTION The router has adjusted its time based on information from the Time calibration is time server.

  • Page 212: Table 90 System Error Logs

    P-335 Plus User’s Guide Table 89 System Maintenance Logs (continued) LOG MESSAGE DESCRIPTION Someone has logged on to the router's web configurator Successful HTTPS login interface using HTTPS protocol. Someone has failed to log on to the router's web configurator HTTPS login failed interface using HTTPS protocol.

  • Page 213: Table 92 Tcp Reset Logs

    P-335 Plus User’s Guide Table 92 TCP Reset Logs LOG MESSAGE DESCRIPTION The router sent a TCP reset packet when a host was under a SYN Under SYN flood attack, flood attack (the TCP incomplete count is per destination host.)

  • Page 214: Table 94 Icmp Logs

    P-335 Plus User’s Guide Table 94 ICMP Logs LOG MESSAGE DESCRIPTION ICMP access matched the default policy and was blocked Firewall default policy: ICMP or forwarded according to the user's setting. For type and <Packet Direction>, <type:%d>, code details, see Table 101 on page 217.

  • Page 215: Table 97 Upnp Logs

    P-335 Plus User’s Guide Table 96 PPP Logs (continued) LOG MESSAGE DESCRIPTION The PPP connection’s Link Control Protocol stage is closing. ppp:LCP Closing The PPP connection’s Internet Protocol Control Protocol stage is closing. ppp:IPCP Closing Table 97 UPnP Logs LOG MESSAGE DESCRIPTION UPnP packets can pass through the firewall.

  • Page 216: Table 99 Attack Logs

    P-335 Plus User’s Guide Table 98 Content Filtering Logs (continued) LOG MESSAGE DESCRIPTION The connection to the external content filtering server failed. Connecting to content filter server fail License key is invalid The external content filtering license key is invalid.

  • Page 217: Table 100 Acl Setting Notes

    P-335 Plus User’s Guide Table 100 ACL Setting Notes PACKET DIRECTION DIRECTION DESCRIPTION (L to W) LAN to WAN ACL set for packets traveling from the LAN to the WAN. (W to L) WAN to LAN ACL set for packets traveling from the WAN to the LAN.

  • Page 218: Table 102 Syslog Logs

    P-335 Plus User’s Guide Table 101 ICMP Notes (continued) TYPE CODE DESCRIPTION Timestamp request message Timestamp Reply Timestamp reply message Information Request Information request message Information Reply Information reply message Table 102 Syslog Logs LOG MESSAGE DESCRIPTION "This message is sent by the system ("RAS" displays as the <Facility*8 + Severity>Mon dd...

  • Page 219: Figure 134 Displaying Log Categories Example

    ZyXEL Device is to record. 2 Use to view a list of the log categories. sys logs category Figure 134 Displaying Log Categories Example Copyright (c) 1994 - 2006 ZyXEL Communications Corp. ras> sys logs category access attack display...
  • Page 220 P-335 Plus User’s Guide Displaying Logs • Use the command to show all of the logs in the ZyXEL Device’s sys logs display log. • Use the command to show the log settings for all of the sys logs category display log categories.

  • Page 221: Netbios Filter Commands

    P-335 Plus User’s Guide P P E N D I X NetBIOS Filter Commands The following describes the NetBIOS packet filter commands. Introduction NetBIOS (Network Basic Input/Output System) are TCP or UDP broadcast packets that enable a computer to connect to and communicate with a LAN.

  • Page 222: Table 104 Netbios Filter Default Settings

    P-335 Plus User’s Guide The filter types and their default settings are as follows. Table 104 NetBIOS Filter Default Settings NAME DESCRIPTION EXAMPLE Between LAN This field displays whether NetBIOS packets are blocked or forwarded Block and WAN between the LAN and the WAN.

  • Page 223: Appendix H Services

    P-335 Plus User’s Guide P P E N D I X Services The following table lists some commonly-used services and their associated protocols and port numbers. • Name: This is a short, descriptive name for the service. You can use this one or create a different one, if you like.
  • Page 224 P-335 Plus User’s Guide Table 105 Examples of Services (continued) NAME PROTOCOL PORT(S) DESCRIPTION HTTP Hyper Text Transfer Protocol - a client/ server protocol for the world wide web. HTTPS HTTPS is a secured http session often used in e-commerce.
  • Page 225 P-335 Plus User’s Guide Table 105 Examples of Services (continued) NAME PROTOCOL PORT(S) DESCRIPTION RCMD Remote Command Service. REAL_AUDIO 7070 A streaming audio service that enables real time sound over the web. REXEC Remote Execution Daemon. RLOGIN Remote Login. ROADRUNNER...
  • Page 226 P-335 Plus User’s Guide Table 105 Examples of Services (continued) NAME PROTOCOL PORT(S) DESCRIPTION TFTP Trivial File Transfer Protocol is an Internet file transfer protocol similar to FTP, but uses the UDP (User Datagram Protocol) rather than TCP (Transmission Control Protocol).

  • Page 227: Wall-Mounting Instructions

    P-335 Plus User’s Guide P P E N D I X Wall-mounting Instructions Do the following to hang your ZyXEL Device on a wall. Note: See the product specifications appendix for the size of screws to use and how far apart to place them.
  • Page 228 P-335 Plus User’s Guide Appendix I Wall-mounting Instructions...

  • Page 229: Figure 137 Configuration Text File Format: Column Descriptions

    P-335 Plus User’s Guide P P E N D I X Internal SPTGEN This appendix introduces Internal SPTGEN. All menus shown in this appendix are example menus meant to show SPTGEN usage. Actual menus for your product may differ. Internal SPTGEN Overview Internal SPTGEN (System Parameter Table Generator) is a configuration text file useful for efficient configuration of multiple ZyXEL Devices.

  • Page 230: Figure 138 Invalid Parameter Entered: Command Line Example

    P-335 Plus User’s Guide Internal SPTGEN File Modification - Important Points to Remember Each parameter you enter must be preceded by one “=”sign and one space. Some parameters are dependent on others. For example, if you disable the Configured field in...

  • Page 231: Figure 140 Internal Sptgen Ftp Download Example

    P-335 Plus User’s Guide Figure 140 Internal SPTGEN FTP Download Example c:\ftp 192.168.1.1 220 PPP FTP version 1.0 ready at Sat Jan 1 03:22:12 2000 User (192.168.1.1:(none)): 331 Enter PASS command Password: 230 Logged in ftp> bin 200 Type I OK ftp>...

  • Page 232: Table 106 Abbreviations Used In The Example Internal Sptgen Screens Table

    P-335 Plus User’s Guide Example Internal SPTGEN Menus This section provides example Internal SPTGEN menus. Table 106 Abbreviations Used in the Example Internal SPTGEN Screens Table ABBREVIATION MEANING Field Identification Number Field Name Parameter Values Allowed INPUT An example of what you may enter Applies to the ZyXEL Device.
  • Page 233 P-335 Plus User’s Guide Table 108 Menu 3 30100012 = Output protocol filters Set 4 = 256 30100013 = Output device filters Set 1 = 256 30100014 = Output device filters Set 2 = 256 30100015 = Output device filters Set 3...
  • Page 234 P-335 Plus User’s Guide Table 108 Menu 3 30201005 = Version <0(Rip-1) | 1(Rip-2B) |2(Rip-2M)> 30201006 = IP Alias #1 Incoming protocol filters = 256 Set 1 30201007 = IP Alias #1 Incoming protocol filters = 256 Set 2 30201008 =...
  • Page 235 P-335 Plus User’s Guide Table 108 Menu 3 INPUT 30500001 = ESSID Wireless 30500002 = Hide ESSID <0(No) | 1(Yes)> 30500003 = Channel ID <1|2|3|4|5|6|7 |8|9|10|11|12| 13> 30500004 = RTS Threshold <0 ~ 2432> = 2432 30500005 = FRAG. Threshold <256 ~ 2432>...

  • Page 236: Table 109 Menu 4 Internet Access Setup

    P-335 Plus User’s Guide Table 109 Menu 4 Internet Access Setup / Menu 4 Internet Access Setup INPUT 40000000 = Configured <0(No) | 1(Yes)> 40000001 = <0(No) | 1(Yes)> 40000002 = Active <0(No) | 1(Yes)> 40000003 = ISP's Name = ChangeMe...

  • Page 237: Table 110 Menu 12

    P-335 Plus User’s Guide Table 109 Menu 4 Internet Access Setup (continued) 40000027 = ATM QoS Type <0(CBR) | (1 (UBR)> 40000028 = Peak Cell Rate (PCR) 40000029 = Sustain Cell Rate (SCR) 40000030 = Maximum Burst Size(MBS) 40000031= RIP Direction <0(None) |...

  • Page 238: Table 111 Menu 15 Sua Server Setup

    P-335 Plus User’s Guide Table 111 Menu 15 SUA Server Setup / Menu 15 SUA Server Setup INPUT 150000001 = SUA Server IP address for default = 0.0.0.0 port 150000002 = SUA Server #2 Active <0(No) | 1(Yes)> 150000003 = SUA Server #2 Protocol <0(All)|6(TCP)|17(U...

  • Page 239: Table 112 Menu 21.1 Filter Set #1

    P-335 Plus User’s Guide Table 111 Menu 15 SUA Server Setup (continued) 150000031 = SUA Server #7 Local IP address = 0.0.0.0 150000032 = SUA Server #8 Active <0(No) | 1(Yes)> 150000033 = SUA Server #8 Protocol <0(All)|6(TCP)|17(U DP)> 150000034 =...
  • Page 240 P-335 Plus User’s Guide Table 112 Menu 21.1 Filter Set #1 (continued) 210101002 = IP Filter Set 1,Rule 1 Active <0(No)|1(Yes)> 210101003 = IP Filter Set 1,Rule 1 Protocol 210101004 = IP Filter Set 1,Rule 1 Dest IP address = 0.0.0.0...

  • Page 241: Table 113 Menu 21.1 Filer Set #2

    P-335 Plus User’s Guide Table 112 Menu 21.1 Filter Set #1 (continued) 210102013 = IP Filter Set 1,Rule 2 Act Match <1(check next)|2(forward)| 3(drop)> 210102014 = IP Filter Set 1,Rule 2 Act Not Match <1(check next)|2(forward)| 3(drop)> Table 113 Menu 21.1 Filer Set #2, / Menu 21.1 filter set #2,...

  • Page 242: Table 114 Menu 23 System Menus

    P-335 Plus User’s Guide Table 113 Menu 21.1 Filer Set #2, (continued) 210202001 = IP Filter Set 2, Rule 2 Type <0(none)|2(TCP/IP)> = 2 210202002 = IP Filter Set 2, Rule 2 Active <0(No)|1(Yes)> 210202003 = IP Filter Set 2, Rule 2 Protocol...

  • Page 243: Table 115 Menu 24.11 Remote Management Control

    P-335 Plus User’s Guide Table 114 Menu 23 System Menus (continued) 230200005 = Authentication Server Shared Secret 111111111111 111111111111 1111 230200006 = Accounting Server Configured <0(No) | 1(Yes)> 230200007 = Accounting Server Active <0(No) | 1(Yes)> 230200008 = Accounting Server IP Address 192.168.1.44...

  • Page 244: Table 116 Command Examples

    P-335 Plus User’s Guide Table 115 Menu 24.11 Remote Management Control (continued) 241100002 = TELNET Server Access <0(all)|1(none)|2(L an)|3(Wan)> 241100003 = TELNET Server Secured IP address = 0.0.0.0 241100004 = FTP Server Port = 21 241100005 = FTP Server Access <0(all)|1(none)|2(L...
  • Page 245 P-335 Plus User’s Guide Index Copyright Customer Support ActiveX alternative subnet mask notation Applications 27, 28 PR switch Print Server DDNS Print Server and Router combined see also Dynamic DNS USB port Default Asymmetrical routes and IP alias DHCP 40, 73...
  • Page 246 P-335 Plus User’s Guide using HTTP IP address 117, 120 LAN Setup FTP Restrictions LAN TCP/IP Logs Host MAC address see also Meia Access Control MAC address MAC address cloning Media Access Control IGMP MAC address Interference Statement see also MAC...
  • Page 247 P-335 Plus User’s Guide dial-up connection Syntax Conventions see also Point-to-Point Protocol over Ethernet System General Setup PPTP 48, 62 System information see also Point-to-Point Tunneling Protocol System Maintenance Print server System Name driver installation requirements System name Print server driver...

  • Page 248: Plus User's Guide

    P-335 Plus User’s Guide WAN advanced WAN IP address assignment WAN MAC address WAN Wizard Warnings Web Configurator how to access Introduction navigating Overview Web Proxy Wildcard Wizard setup ZyXEL Limited Warranty Note...

Table of Contents