Chapter 5 Lan Screens; Lan Overview; Dhcp Setup; Ip Pool Setup - ZyXEL Communications Wireless Router P-334 User Manual

This chapter describes how to configure LAN settings.

5.1 LAN Overview

Local Area Network (LAN) is a shared communication system to which many computers are
attached. The LAN screens can help you configure a LAN DHCP server, manage IP addresses,
and partition your physical network into logical networks.

5.2 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server
on your LAN, or else the computer must be manually configured.

5.2.1 IP Pool Setup

The Prestige is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to
192.168.1.64. This configuration leaves 31 IP addresses (excluding the Prestige itself) in the
lower range for other server computers, for instance, servers for mail, FTP, TFTP, web, etc.,
that you may have.

5.2.2 System DNS Servers

Refer to the IP Address and Subnet Mask section in the Wizard Setup chapter.

5.3 LAN TCP/IP

The Prestige has built-in DHCP server capability that assigns IP addresses and DNS servers to
systems that support DHCP client capability.

5.3.1 Factory LAN Defaults

The LAN parameters of the Prestige are preset in the factory with the following values:

Chapter 5 LAN Screens

Prestige 334 User's Guide
C
H A P T E R
LAN Screens
5
64