Prestige 334 User's Guide
7.6.2 Two Points To Remember About Trigger Ports
1 Trigger events only happen on data that is going coming from inside the Prestige and
going to the outside.
2 If an application needs a continuous data stream, that port (range) will be tied up so that
another computer on the LAN can't trigger it.
7.7 Configuring Trigger Port Forwarding
To change your Prestige's trigger port settings, click SUA/NAT and the Trigger Port tab. The
screen appears as shown.
Figure 34 Trigger Port
The following table describes the labels in this screen.
Table 27 Trigger Port
LABEL
#
Name
99
Note: Only one LAN computer can use a trigger port (range) at
a time
DESCRIPTION
This is the rule index number (read-only).
Type a unique name (up to 15 characters) for identification purposes. All characters
are permitted - including spaces.
Chapter 7 Network Address Translation (NAT) Screens