Configuring Route Entry; Figure 36 Static Route; Table 28 Static Route - ZyXEL Communications Wireless Router P-334 User Manual

Prestige 334 User's Guide

Figure 36 Static Route

The following table describes the labels in this screen.

Table 28 Static Route

LABEL
#
Name
Active
Destination
Gateway
Edit

8.2.1 Configuring Route Entry

Select a static route index number and click Edit. The screen shown next appears. Fill in the
required information for each static route.
103
DESCRIPTION
Number of an individual static route.
Name that describes or identifies this route.
This field shows whether this static route is active (Yes) or not (No).
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is an immediate neighbor of
your Prestige that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your Prestige; over the WAN,
the gateway must be the IP address of one of the remote nodes.
Select a static route index number and then click Edit to set up a static route on the
Prestige.
Chapter 8 Static Route Screens