Command Usage; Call Control Support; Budget Management; Figure 166 Valid Commands - ZyXEL Communications Wireless Router P-334 User Manual

Prestige 334 User's Guide

31.1.2 Command Usage

A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.

Figure 166 Valid Commands

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
P334> ?
Valid commands are:
sys
poe
ipsec
P334>

31.2 Call Control Support

The Prestige provides two call control functions: budget management and call history. Please
note that this menu is only applicable when Encapsulation is set to PPPoE in menu 4 or
menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of
the Prestige within certain times. When the total outgoing call time exceeds the limit, the
current call will be dropped and any future outgoing calls will be blocked.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 — System
Maintenance — Call Control, as shown in the next table.

Figure 167 Menu 24.9 System Maintenance : Call Control

31.2.1 Budget Management

Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from Menu
24.9 - System Maintenance - Call Control to bring up the following menu.
299
exit device
pptp config
ppp
Menu 24.9 - System Maintenance - Call Control
1. Budget Management
2. Call History
Enter Menu Selection Number:
ether
ip
Chapter 31 System Maintenance