Configuring Ftp; Figure 51 Remote Management: Ftp; Table 40 Remote Management: Ftp - ZyXEL Communications Wireless Router P-334 User Manual

Table 39 Remote Management: Telnet
LABEL
Apply
Reset

13.5 Configuring FTP

You can upload and download the Prestige's firmware and configuration files using FTP,
please see the chapter on firmware and configuration file maintenance for details. To use this
feature, your computer must have an FTP client.
To change your Prestige's FTP settings, click REMOTE MGMT, then the FTP tab. The
screen appears as shown.

Figure 51 Remote Management: FTP

The following table describes the labels in this screen.

Table 40 Remote Management: FTP

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset
Chapter 13 Remote Management Screens
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the Prestige using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
Prestige using this service.
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Prestige using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Prestige 334 User's Guide
DESCRIPTION
142