Analog Input/Output Section - Yamaha AW2816 Owner's Manual

Chapter
1

Analog input/output section

A
[GAIN] control
These knobs adjust the input sensitivity of INPUT
jacks 1–8 over a range of +4 dB to –46 dB. They
support signals ranging from line level devices
such as synthesizers to mic inputs.
B
[PEAK] indicators
A [PEAK] indicator will light red if the input signal
that has passed through the [GAIN] control
reaches a level 3 dB below the clipping point. In
order to record at the optimal level, adjust the
[GAIN] control (1) so that this indicator flickers
briefly when you play most loudly.
C
[PHONES] (headphones) control
This knob adjusts the volume of the headphones
connected to the rear panel PHONES jack.
D
[MONITOR OUT] control
This knob adjusts the level of the signal that is out-
put from the rear panel MONITOR OUT jacks.
Parts and their functions
This chapter explains the functions of each part of the AW2816's top
panel, rear panel, and front panel.
The names of controllers (keys and knobs etc.) on the top panel are enclosed in square brackets
[ ] in order to distinguish them from the software knobs and buttons that appear in the display.
Example: [SEL] key, [GAIN] control
2
1
Top panel
3
Operation section
4
1
13