Yamaha AW2816 Owner's Manual page 311

AUX5/EFF1, AUX6/EFF2 screens
Edit the parameters of internal effects 1/2
Function
Edit the parameters of the effect that is
selected for internal effect 1 (AUX5/
EFF1 screen) or external effect 2
(AUX6/EFF2).
Key operation
• [AUX 5] key/[AUX 6] [F1] (Eff. Edit)
key
• Repeatedly press the [AUX 5] key or
[AUX 6] key until the desired screen
appears.
Screen functions
A
USED AS (Effect usage method)
This indicates the type of connection with which
the internal effect is currently being used.
• AUX5/AUX6 ........ The internal effect is being
used via AUX send/return.
• INSERT ................ The internal effect is inserted
into a specific channel.
Tip!
This area is for display only, and cannot be edited. The
selection of whether the internal effect will be used via
send/return or inserted can be changed in the EFFECT
PATCH area of the PATCH screen/Patch IN page.
B
BYPASS
This switches bypass on/off for the internal effect.
Tip!
Even when the cursor is not located in the BYPASS
area, you can press the [ENTER] key to switch bypass
on/off.
C
CURRENT EFFECT NAME
This displays the name (library title) of the cur-
rently recalled effect settings. The "M" or "S" sym-
bol displayed at the right indicates whether the
type of effect used by these settings is monaural
(M) or stereo (S).
D
EFFECT TYPE
This displays the type of the currently selected
effect. At the right of this area, the type is shown
graphically.
Eff. Edit page
1
2
4
6
It is not possible to change the effect type in this page.
If you want to use a different effect type, you must
recall from the library an effect setting that uses the
desired type. Library recall operations are performed
in the Library page of the AUX5/EFF1 or AUX6/EFF2
screen.
E
Output meter
This indicates the output level of the internal
effect.
F
Effect parameters
Use the knobs displayed in this area to edit the
parameters of the effect. The type of parameters
and their ranges will depend on the type of the
currently selected effect. For details on the param-
eter types and ranges, refer to the appendix at the
end of this manual.
G
MIX BAL. (Mix balance) knob
This knob sets the mix balance between the effect
sound (wet) that is output from the internal effect
and the original sound (dry). With a setting of 0%
only the original sound will be output. At 50% the
effect sound and original sound will be mixed
equally, and at 100% only the effect sound will be
output. If you are using the internal effect via AUX
send/return, set this to 100%. If you are inserting
the effect into a specific channel, set it to the
appropriate value for your needs.
Tip!
The MIX BAL. knob will be displayed in the same loca-
tion regardless of the effect type that is selected.
Reference section
3 5
7
309