Yamaha AW2816 Owner's Manual page 132

Editing tracks and virtual tracks
7
TRIM IN
Move the starting location of the selected region later
in time (toward the end of the song), and trim (discard)
the unwanted portion.
• REGION
Select the region that you want to trim.
• TRIM IN
Specify the amount of trimming in sample units.
• EXECUTE
Execute the command.
TRIM OUT
Move the ending location of the selected region ear-
lier in time (toward the beginning of the song), and
trim (discard) the unwanted portion.
• REGION
Select the region that you want to trim.
• TRIM OUT
Specify the amount of trimming in sample units.
• EXECUTE
Execute the command.
T-COMP (Time compression/expansion)
Expand or compress the length of the selected region
without affecting its pitch.
• REGION
Select the region that you want to expand or
compress.
• RATIO
Specify the ratio of expansion/compression in
0.01% units, over a range of 50–200%.
• EXECUTE
Execute the command.
Execution of the T-COMP command will require more
processing time than the actual time length of the
data being processed. Also, it is not possible to cancel
the command while processing is occurring.
126
PITCH
Raise or lower the pitch of the selected region without
affecting the length of the audio.
• REGION
Select the region whose pitch you want to
change.
• PITCH
Specify the amount of pitch change in semitone
steps, over a range of ±12 semitones.
• FINE
Specify a fine adjustment in one-cent units to the
pitch change, over a range of ±50 cents.
• EXECUTE
Execute the command.
Execution of the PITCH command will require more
processing time than the actual time length of the
data being processed. Also, it is not possible to cancel
the command while processing is occurring.
EXPORT
Convert the audio data of the specified region into a
WAV file, and write it to a CD-RW drive, external MO
drive, or similar device.
• REGION
Select the region that you want to write as a WAV
file.
• TO DRIVE
Switch to a screen where you can select the writ-
ing destination drive. In that screen, use the
DRIVE area to select the drive, move the cursor
to the EXIT button, and press the [ENTER] key to
return to the previous screen.
• TO FILE
Access a NAME EDIT popup window to edit the
filename of the WAV file. Input the new file-
name, move the cursor to the OK button and
press the [ENTER] key to finalize it.
• TO SIZE
When writing 24 bit audio data to a WAV file,
you can select whether it will be written as 24 bit
data (24 bit) or whether the lower 8 bits will be
discarded, converting the data to 16 bit (16 bit).
• EXECUTE
Execute the command.
Tip!
• For details on using the EXPORT command, refer to
page 167.
• With the exception of the NAME and EXPORT com-
mands of the REGION menu, the result of the oper-
ation can be undone by pressing the [UNDO] key
immediately after execution.
• To specify a location for the TO START parameter,
you can use the [
[A]/[B] keys, [
assign the parameter to the location of the corre-
sponding marker or locate point.
Operation section
]/[ ] keys, [IN]/[OUT] keys,
]/[ ] keys, or [RTZ] key to