Yamaha AW2816 Owner's Manual page 351

Fader Recall Safe settings
Function
Exclude the faders of specific channels
from recall operations when a scene is
recalled.
Key operation
• [SCENE] key [F3] (RCL. Safe) key
• Repeatedly press the [SCENE] key
until the screen shown at the right
appears.
Screen functions
A
RECALL SAFE CHANNEL
By turning on buttons in this area, you can set the
corresponding channels to Recall Safe. The faders
of channels set to Recall Safe will maintain their
current position even when a scene is recalled.
The following channels can be set to Fader Recall
Safe.
• Input channels 1–8
• Monitor channels 1–16
• Effect return channels 1/2
• Stereo output channel
Tip!
• Fader Recall Safe will take effect if the ENABLE area
button is set to "ENABLE."
• Fader Recall Safe settings are common to all scenes.
• Recall Safe settings are not linked for paired chan-
nels. This means that if one channel of a pair is set to
Recall Safe, the faders of the pair may be in different
positions immediately after a scene is recalled. How-
ever even in this case, moving one of the faders will
cause the other fader to follow immediately.
• Only the fader of the channel will be excluded from
recall operations. Other mix parameters such as pan,
EQ, and dynamics processor settings will change
according to the scene that is recalled.
B
ENABLE
Move the cursor to this button and press the
[ENTER] key to specify whether the Fader Recall
Safe function will be enabled (ENABLE) or not
(DISABLE).
RCL. Safe page
Reference section
1 2
349