Saving An Effect Program; Operations - Yamaha AW2816 Owner's Manual

Saving an effect program

Up to 86 different effect programs that you edited can
be stored (saved) in vacant locations of the effect
library, and recalled later. Here's how the effect pro-
gram you edited for effect 2 can be stored in the
library.
Tip!
• Programs stored in the effect library are saved on
the hard disk as part of the song data.
• By using the MIDI Bulk Dump function, specific
effect programs that you stored in the effect library
can be backed up on a MIDI sequencer or other
external MIDI device. For details on Bulk Dump,
refer to page 212.
1
Press the [AUX 6] key
The AUX6/EFF2 screen Library page will appear.
2
Use the [DATA/JOG] dial to select the store
destination library number (042–128).
Library numbers 001–041 are recall-only. They can-
not be stored.
3
Move the cursor to the STORE button, and
press the [ENTER] key.
The TITLE EDIT popup window will appear,
allowing you to input a name (library title) for the
effect program.
[F2] key.
Operation section
4
Use the character palette to input a name.
For details on inputting characters, refer to
page 37.
5
To store the program, move the cursor to
the OK button and press the [ENTER] key.
To cancel without storing, move the cursor to the
CANCEL button and press the [ENTER] key.
Tip!
You can also store directly without inputting the
library title. To do so, go to the UTILITY screen Pre-
fer.1 page ([UTILITY] key
STORE CONFIRMATION parameter OFF.
[F2] key), and turn the
5
93