Yamaha AW2816 Owner's Manual page 175

Using the internal hard disk/external storage devices
11
Characters that can be used in a filename are
limited to the following.
• When writing to CD-R/RW media
.......... A–Z 0–9 _
• When writing to media other than CD-R/RW
.......... A–Z a–z 0–9 _ ! # & + - ( ) .
• By default, the track name or region name plus a
filename extension of .WAV will be the filename.
• It is not possible to use a period at the beginning of
the filename.
• If you input any characters other than those listed
above, they will be converted into an underscore (_).
• If you select "AL" for the TRACK parameter, it will
not be possible to edit the filename. The track name
plus .WAV will be the filename.
11
If you want 24 bit audio tracks to be con-
verted to 16 bit data when they are writ-
ten, move the cursor to the TO SIZE button
and press the [ENTER] key.
If the current song uses 24 bit quantization, you
can specify that the lower 8 bits be discarded
and the data written as a 16 bit WAV file. Use the
[DATA/JOG] dial to change the setting to 16 (bit),
and press the [ENTER] key.
Tip!
• Omit this step if you want to export the data as a 24
bit WAV file.
• If the current song is 16 bit, the setting of the TO
SIZE parameter cannot be changed.
12
Move the cursor to the EXECUTE button,
and press the [ENTER] key.
A popup window will ask you to confirm the
Export operation.
170
13
To export the WAV file, move the cursor to
the OK button and press the [ENTER] key.
To cancel without exporting, move the cursor to
the CANCEL button and press the [ENTER] key.
It is not possible to halt the operation while the WAV
file is being exported.
Tip!
• If the export destination device (MO or external
hard disk) contains an identically-named file, a
popup window will ask you whether you want to
overwrite the file.
• If anything has been stored on the writing destina-
tion CD-RW media, a popup window will ask you
whether it is ok to erase the media. Move the cursor
to the OK button and press the [ENTER] key to erase
the media and then export the data.
• If you set the TRACK parameter to "AL," WAV files
will be written in the order of tracks 1–16.
• If the free space on the media is used up while the
data is being written, exporting of subsequent tracks
will be halted, and they will not be written as WAV
files.
Operation section