Vignette faceplate and safety screen installation
VIGNETTE FACEPLATE AND SAFETY SCREEN INSTALLATION
1. Hook the outer Vignette frame onto the unit. Brackets on the frame hook on to tabs in the
unit.
Note: Use the inner slots for the P36/P36E units and the outer slots for the P36D.
2. Slot the tabs on the inner Vignette frame with safety screen into the
corresponding slots in the outer Vignette frame as shown below.
P36D
P36/P36E
Slot
Tab
P36E-11 Zero Clearance Direct Vent Gas Fireplace
Adjustable Mounting Brackets are in increments
of 1/8th
3. Check to ensure that the vignette frame and screen
are evenly spaced at top and bottom-looking from
side. If it is not evenly spaced, simply lift up the corner
and pull gently towards you untill adjusted.
NOTE: All the 4 corners can be adjusted.
installation
|
53
07.14.15