Table of Contents
Advertisement
9)
Place Log 02-52 between Logs 02-51 and 02-49 and on
the indentation on Log 02-54. The bottom right end sits
behind the rear grate tab.
Use the indentation in log 02-54 to
locate log 02-52.
Photo shows rear
grate tab. Log 02-51
was removed to
show the positioning
of Log 02-52.
02-50
908-734a
GAS FIREPLACE
02-49
02-52
02-51
02-54
02-52
Rear
Grate
02-54
Tab
02-49
02-55
02-53
10) Place the embers on the front of the burner tray in the
places shown on the photo.
Separate platinum embers and place on the front burner
on and around the embers. Avoid stacking platinum em-
bers. Platinum embers may be placed over burner ports.
Separate embaglow embers and place over platinum
embers.
Place embers in these 3 locations on the burner tray.
11) Test fire to ensure proper light off (make sure flame flows
smoothly from one end of burner to the other). If there is
any flame hesitation, check that area for any blockage of
the burner ports.
12) Install flush glass and bay glass (if used) as per instructions
in this manual.
02-51
Page 3 of 3
P36E-11 Zero Clearance Direct Vent Gas Fireplace
installation
02-52
02-54
01/04/08
P36
|
51
Advertisement
Table of Contents
