Table of Contents
Advertisement
To the New Owner:
Congratulations!
You are the owner of a state-of-the-art Gas Fireplace by REGENCY FIREPLACE PRODUCTS INTERNATIONAL
LTD. The P36E has been designed to provide you with all the warmth and charm of a wood fireplace at the flick of a
switch. The model P36E has been approved by Intertek for both safety and efficiency. As it also bears our own mark,
it promises to provide you with economy, comfort and security for many trouble free years to follow. Please take a
moment now to acquaint yourself with these instructions and the many features of your Regency Fireplace.
!
!
A barrier designed to reduce the risk of burns from the hot viewing glass
is provided with this appliance and must be installed for the protection
of children and other at risk individuals.
CAUTION:
HOT WHILE IN OPERATION. DO NOT TOUCH.
SEVERE BURNS MAY RESULT. KEEP CHILDREN, CLOTHING, FURNITURE,
GASOLINE, AND ANY OTHER LIQUIDS WITH FLAMMABLE VAPOURS AWAY.
KEEP BURNER AND CONTROL COMPARTMENT CLEAN.
SEE INSTALLATION AND OPERATING INSTRUCTIONS ACCOMPANYING
APPLIANCE.
920-408
ON DEMAND PILOT LIGHT
4.34.7
Instruction Plate
Important information if using the appliance in CPI (continuous pilot mode) only.
For a glass-fronted gas appliance where the temperature of the glass
This appliance is a ProFlame 1 system fitted with the "On Demand" Pilot, a safety feature which will shut down the gas valve completely by
viewing area outside surface exceeds the limits specified in Clause 5.14.4, the following
extinguishing the pilot light in the event of a continuous full seven days of inactivity.
graphic danger and statements shall be shown on a Class IIIA-2 Permanent Label.
This only applies if the CPI (continuous pilot) switch is in the "on" position.
4.34.6
Each time the main burner shuts down, manually or through the call from the thermostat, the seven day timer starts again.
Instruction Plate
The seven day inactivity timer is controlled within the circuit board. Therefore, if in CPI mode and when the pilot light is extinguished after seven
Each appliance shall bear a Class IIIB marking with letters on a contrasting background, located
straight days of inactivity, the IPI/CPI rocker switch will remain in the "on" position. Therefore, all that is required to relight the pilot would be
adjacent to the controlling device or in an equally conspicuous position where the instruction can be easily read.
to press the on/off button on the remote control transmitter from "on" to "off" and back to "on". Once the pilot has re-established operation will
resume as normal. There is no requirement to do anything with the IPI/CPI rocker switch.
April 22/14: Created draft
If the unit never goes as long as seven full days without a call for heat, the pilot will remain lit until it is manually shut-off.
Double sided
If the unit is being operated in IPI (intermittent pilot) mode, neither the above instructions nor the seven day timer will apply.
Material: Synthetic Paper
Size 5.965" W x 5.71" H
See the instructions in this manual and on the Lighting Instructions plate on the appliance to light or re-light the pilot.
Color: As shown in artwork
|
2
P36E-11 Zero Clearance Direct Vent Gas Fireplace
Front
DANGER
DANGER
HOT GLASS WILL
DO NOT TOUCH GLASS
NEVER ALLOW CHILDREN
TO TOUCH GLASS
(SEVEN DAY SAFETY TIMER)
CAUSE BURNS
UNTIL COOLED
920-408
L'écran par
contact acc
enfants et
ATTE
Risque de
Ne pas to
Ne pas la
vêtement
à distance
S'assurer
Voir les in
l'appareil.
Advertisement
Table of Contents
