Compare Method Selection; Request Aiming Selection; Edm Settings Selection - Pentax R-200 Series Instruction Manual

14.5 Compare method selection

Select 56. COMPARE METHOD SELECTION and press [ENT] to view the COMPARE METHOD
selection window. Press [ENT] to select and press [F5][ACCEPT] to enter.
When "ALL IN ONE INFO" is selected, all information will be displayed on the result of stakeout
panel.
When "LARGE CHARACTOR" is selected, result information is shown with two screens and these
screens and the Graphics screen can be switched by [ENT].

14.6 Request aiming selection

Select 67. REQUEST AIMING and press [ENT] to view the REQUEST AIMING selection window. Press
[ENT] to select and press [F5][ACCEPT] to enter.
Pressing the [ENT] after entering the Horizontal angle, the AIM AT THE REFERENCE
POINT screen is viewed when 1. ON is selected and not viewed when 2. OFF is selected
without Coordinates input of BSP.

14.7 EDM settings selection

Select 78. EDM SETTINGS and press [ENT] to view
the EDM SETTINGS selection window. Press [ENT]
to select and press [F5][ACCEPT] to enter.
1. COORD. SYSTEM
2. INPUT METHOD
3. ACTION METHOD :PROCESS TYPE
4. INPUT METHOD :FIXED PLANE
5.COMPARE METH :ALL IN ONE INFO.
5.COMPARE METHOD:ALL IN ONE INFO.
6.REQUEST AIMING : OFF
7.EDM SETTINGS
8.ELEV. FACTOR
9. DUPLICATE PN CHK
101
:XYZ
1.ALL IN ONE INFO.
2.LARGE CHARACTER
1.ON.
2.OFF
:OFF