Inputting An Arbitrary Horizontal Angle - Pentax R-200 Series Instruction Manual

• lf you want to hold the horizontal angle when you are in MODE A, press [F5] [MODE]
first to switch to MODE B, then press [F3] [HOLD].
• The [F3] [HOLD] cannot hold the vertical angle or distance.
• To release the horizontal angle from being held, press [F3] [HOLD] once.
• Pressing [F3] [HOLD] accidentally during measurement does not hold the horizontal angle
unless you press it again. Once the buzzer stops sounding you can go to the next step.

5.4 Inputting an arbitrary horizontal angle

In case of Horizontal angle 123° 45' 20" input.
Press [F5] [MODE] to enter MODE B.
Press [F2] [ANG SET] to display the ANGLE SET
screen, then press [F4] [
move the cursor to "2. H.ANGLE INPUT".
Press [F5] [SELECT] to open the horizontal angle
input window.
[F5] [CLEAR] is used to clear the values.
Press the numeric key as 123.4520.
] to
27