Elevation Factor - Pentax R-200 Series Instruction Manual

Please refer to the instruction manual of basic function about details of each setting.

14.9 Elevation Factor

" Elevation Factor" as used here refers to Average Elevation Correction and Scale Factor carried out
as part of the measurement process among the special functions.
It is effective only with MEAS-Rect., FREE, CALC-Traverse, and VPM. These reverse corrections are
carried out with STAK (Stakeout, Point To Line). When the instrument is shipped from the factory,
the 1. AVE.ELEV. is set to "0" and the 2. SCALE FACT to "1" so that no correction is carried out.
If correction is necessary, input the appropriate values for the AVE.ELEV and SCALE FACT.
Select 98. Elevation factor and press [ENT] to view the ELEVATION FACTOR selection window. Press
[ENT] to select and press [F5][ACCEPT] to enter.
1. PRIM. MEAS KEY
2. SEC. MEAS KEY
3. MEAS. MIN DISP.
4. TRACK. MIN DISP
45. SHOT COUNT
56. SHOP INPUT
H
R
Cross section of the earth
1. MEAS. SHOT
2. MEAS. CONT
3. TRACK SHOT
4. TRACK CONT
1. TRACK CONT
2. TRACK SHOT
3. MEAS. CONT
4. MEAS. SHOT
1. COARSE
2. FINE
1. COARSE
2. FINE
1. 1 TIME
2. 3 TIMES
3. 5 TIMES
4. INPUT
XX TIME
Sa H
Sb
Sc
5.COMPARE METHOD:ALL IN ONE INFO.
6.REQUEST AIMING : OFF
7.EDM SETTINGS
8.ELEV. FACTOR
9. DUPLICATE PN CHK :OFF
102