Stake Out - Pentax R-200 Series Instruction Manual

7. STAKE OUT

From the known Station point and Direction angle, the Coordinates for the Stakeout are obtained.
7.1 STAKE OUT
BSP
Stake out Point
Station Point
Press [F1][STAK] to view the STAKEOUT METHOD SELECTION screen.
Select 1.STAKE OUT and press [ENT] to view the STATION
POINT SETUP screen.
Open the PN, X, Y, Z, IH and PC input window and input each. Save the data by pressing [F1][SAVE].
Press [ENT] to view STATION POINT H ANGLE SETUP
screen.
Input the H. angle by pressing [F2][INPUT], [F3][0SET] and [F4] [HOLD] or Backsight Coordinates by
pressing [F1][BSP].
37