All Clear - Pentax R-200 Series Instruction Manual

3.5 All Clear

Select 5. All Clear by pressing the down arrow key.
Press [ENT] to view its screen.
Warning: When [CLEAR] is pushed, all Job Files
are deleted.
NOTE: - Creating several new JOB Files and writing-in or rewriting data on the same
JOB Files repeatedly may cause the time of writing-in and rewriting of the data to be slower.
- Saving data when the memory capacity is almost full, and then deleting some JOB
Files in order to secure open memory capacity, may cause the time of writing-in and
rewriting the data to be slower.
- In case the time of writing-in or rewriting the data becomes slower, send
the necessary data to PC for backup, then enter 'All Clear' in FILE MANAGER.
The above procedure will format the inside memory automatically and improve the time
of writing-in and rewriting the data. Beware that all JOB Files will be deleted.
15