Pentax R-200 Series Instruction Manual page 98

Press [ENT] to view the ADD/CALC. SELECTION MENU
screen.
(Measuring is not needed. Just press [ENT].)
Press the [F1][ADD] to view the KNOWN POINT COORD.
SETUP screen.
Aim at Point 2, 3 and 4.
In the same manner, input the values of Point 2,3 and 4.
After entering values of PN4, press [ENT] twice to view the
MEASURE and ADD/CALC SELECTION MENU.
Press the [F5][CALC] to view the RESULT COORD. OF STATIONING screen.
The Station Coordinates is displayed. Result coordinates of free stationing can be saved for Station
setup after pressing [ACCEPT]. Horizontal angle of the result coordinates will be affected to the
Station point for measuring.
33