Installing On Os/2; Installing On Unixware - IBM Netfinity ServeRAID-3H Installation And User Manual

6. When prompted for the installation directory, provide only the drive letter to the NetWare SYS partition
that you mapped in step 3.
7. Follow the instructions on the screen to install the program.
To use the ServeRAID Manager program, see Chapter 3, "Configuring controllers using the ServeRAID
Manager program" on page 17.

Installing on OS/2

Note: This version of the ServeRAID Manager program supports up to eight ServeRAID controllers when
using OS/2.
To install the ServeRAID Manager program for OS/2, do the following:
1. Configure your controllers and arrays. See Chapter 3, "Configuring controllers using the ServeRAID
Manager program" on page 17 for information.
2. Install your operating system. See the instructions that came with your server and your operating
system for information.
3. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
4. Open an OS/2 command window.
5. Type the following:
d:
where d is the CD-ROM drive letter.
6. Press Enter; then, type:
cd \programs\os2\manager
7. Press Enter; then, type:
install
8. Press Enter.
9. The installation program starts. Follow the instructions on the screen to install the program. On the
final installation panel, be sure to specify the location where you want to install the ServeRAID
Manager program.
To use the ServeRAID Manager program, see Chapter 3, "Configuring controllers using the ServeRAID
Manager program" on page 17.

Installing on UnixWare

Notes:
1. To use the ServeRAID Manager program with UnixWare, you must have either the Java Runtime
Environment (JRE) or the Java Development Kit (JDK) installed on your server.
2. To install or remove the ServeRAID Manager package you must have "root" privileges.
3. This version of the ServeRAID Manager program supports up to eight ServeRAID controllers when
using UnixWare.
To install the ServeRAID Manager program for UnixWare, do the following:
1. Configure your controllers and arrays. See Chapter 3, "Configuring controllers using the ServeRAID
Manager program" on page 17 for information.
66
IBM ServeRAID-3H, ServeRAID-3HB, and ServeRAID-3L, Controllers