Installing Device Drivers For Netware; Installing The Device Driver After Installing Windows Nt 4.0; Installing The Files While Installing Netware 4.X Or 5.0 - IBM Netfinity ServeRAID-3H Installation And User Manual

5. When prompted to insert the Manufacturer-supplied-hardware support disk, insert the IBM
ServeRAID Device Driver Diskette into the diskette drive; then, press Enter.
6. Select IBM ServeRAID Controller (NT 4.0); then, press Enter. A message similar to the following will
appear: Setup is loading files (IBM ServeRAID Controller (NT 4. ))...
7. When prompted, press Enter to continue.
8. Use the instructions provided in the Windows NT manual to complete the normal installation process.
9. After you complete the installation, be sure to apply the latest Service Pack.

Installing the device driver after installing Windows NT 4.0

To install the ServeRAID device driver after installing Windows NT 4.0:
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. From the Start Menu, select Settings; then, select Control Panel.
3. Select SCSI Adapter; then, click on the Drivers tab.
4. Click on Add; then, click on Have Disk.
5. In the Copy manufacturer's files from field, type:
z:\programs\winnt\driver\nt4_
where z is the drive letter for the CD-ROM.
6. Click OK; then in the next dialog box, click OK again.
7. After the device driver installs, restart the system.

Installing device drivers for NetWare

This section provides two sets of instructions for installing the ServeRAID device driver: one that you can
use during the initial NetWare installation and one that you can use if NetWare already is installed.

Installing the files while installing NetWare 4.x or 5.0

1. Use the instructions provided in the NetWare manual to begin the installation.
2. When the Choose the Server Drivers - Disk Driver prompt appears during the install process, insert
the IBM ServeRAID Device Driver Diskette.
3. Click Select additional or modify selected Disk/LAN drivers.
4. If IPSRAID appears, select Deselect a selected driver.
5. Click Select an additional driver; then, press the Ins (Insert) key to add an unlisted new device
driver.
6. Press F3 to specify a path; then,
For NetWare 4.x, type:
a:\netware4
where a is the diskette drive letter
For NetWare 5.0, type:
a:\netware5
where a is the diskette drive letter
Chapter 4. Installing device drivers and utility programs
51