Starting In Netware; Starting In Os/2 - IBM Netfinity ServeRAID-3H Installation And User Manual

Figure 12. Information mode screen
3. See "Local-only mode and network mode" on page 31.

Starting in NetWare

To start the ServeRAID Manager program in NetWare:
1. From the NetWare console, type:
LOAD RAIDMAN
The program starts in the Information mode and a screen similar to the previous screen appears.
2. See "Local-only mode and network mode" on page 31.

Starting in OS/2

To start the ServeRAID Manager program in OS/2:
1. Change to the directory where you installed the ServeRAID Manager program by typing the following:
cd \RaidMan
2. Type the following; then, press Enter to start the program:
RaidMan
The program starts in the Information mode and a screen similar to the previous screen appears.
3. See "Local-only mode and network mode" on page 31.
30
IBM ServeRAID-3H, ServeRAID-3HB, and ServeRAID-3L, Controllers