Setting The Bootable Cd-Rom Feature - IBM Netfinity ServeRAID-3H Installation And User Manual

Setting the Bootable CD-ROM feature

When you attach a CD-ROM drive to the ServeRAID controller and set the Bootable CD-ROM feature to
Yes, the ServeRAID controller will attempt to start a CD that has a bootable startup partition, if no other
controller in the system is currently using INT13 extensions. Only one controller in the system can support
the INT13 extensions.
To enable the Bootable CD-ROM feature:
1. Select Advanced Functions from the Main Menu of the Mini-Configuration program.
2. Select Configure BIOS Settings from the Advanced Functions menu.
3. Use the Up Arrow (↑) and Down Arrow (↓) keys to highlight BIOS Support for Bootable CD-ROM
then press Enter to change No to Yes.
4. Ensure that the screen has Yes next to BIOS Support for Reading Partition Tables. If not, use the
Up Arrow (↑) and Down Arrow (↓) keys to highlight BIOS Support for Reading Partition Tables;
then, press Enter to change No to Yes.
Note: You must perform this next step to save the new settings.
5. Highlight Save Configuration to the ServeRAID Controller then, press Enter. The program displays
an Okay message and then returns you to the Main Menu of the Mini-Configuration program.
6. Press Ctrl+Alt+Del to restart the system.
Chapter 5. Using utility programs
77