Using Custom Configuration - IBM Netfinity ServeRAID-3H Installation And User Manual

Using Custom configuration

To use the Custom configuration path:
Note: If the Express configuration mode/Custom configuration mode radio buttons do not appear on the
right screen, click
1. Click the ServeRAID controller that you want to configure in the Main Tree.
2. Click the Custom configuration radio button.
3. Click Next. The screen similar to the following appears:
Figure 8. Create arrays screen
4. Using the right mouse button, click on the drive or SCSI channel icons in the Main Tree to select the
drives that you want to add to your arrays, delete from your arrays, or define as hot-spare drives; then,
select a choice from the pop-up list.
or
Drag the drive or SCSI channel icon from the Main Tree and drop it on the Array or Hot-spare drive
icon in the Main Panel on the right. If you change your mind, you can drag the icons back to the Main
Tree to remove them from the configuration.
5. After you select the physical drives for your arrays and define your hot-spare drives, click Next.
on the tool bar.
Chapter 3. Configuring controllers using the ServeRAID Manager program
25