Installing The Files While Installing Unixware; Installing The Files After Installing Unixware - IBM Netfinity ServeRAID-3H Installation And User Manual

12. You can now partition and format the logical drives attached to the ServeRAID adapters and
controllers. See the information provided with UnixWare for more instructions.

Installing the files while installing UnixWare

To install the ServeRAID files while installing UnixWare 7.x:
1. Use the instructions provided with UnixWare to begin the installation.
2. When a message appears asking if you want to install any HBA diskettes, insert the IBM ServeRAID
Device Drivers for SCO Operating Systems Diskette; then, select Install HBA diskette.
3. Use the instructions provided in the UnixWare manual to complete the normal installation process.

Installing the files after installing UnixWare

Use the following instructions to install the ServeRAID files after you install UnixWare, or use these
instructions to update a previously installed ServeRAID file with a newer version. You can use the
UnixWare Pkgadd or the UnixWare SCOAdmin utility program to install the files.
Installing an HBA diskette file using Pkgadd
1. Insert the IBM ServeRAID Device Drivers for SCO Operating Systems Diskette into the diskette drive.
2. Type:
pkgadd –d /dev/dsk/f t
3. Press Enter.
4. When the message Insert diskette into Floppy Drive 1 appears, press Enter.
5. When the message Installation of IBM ServeRAID SCSI IHV HBA (ips) was successful appears,
type:
q
6. Press Enter; then after the device driver is installed, restart the system.
Installing an HBA diskette file using SCOAdmin
1. Insert the IBM ServeRAID Device Drivers for SCO Operating Systems Diskette into the diskette drive.
2. Start the SCOAdmin utility program by typing SCOADMIN at the system prompt.
3. Select Software_Management.
4. Select Application Installer.
5. Click the Install From tab.
6. Select Disk_A.
7. Click Update View button if nothing appears in the window.
8. When the icon labeled ips appears in the window, click Install.
9. After the device driver is installed, restart the system.
Chapter 4. Installing device drivers and utility programs
63