Using The Serveraid Manager Program Installed On Your System; Starting The Serveraid Manager Program After Installing Your Operating System; Viewing The Device And Configuration Information; Starting In Windows Nt - IBM Netfinity ServeRAID-3H Installation And User Manual

Viewing the device and configuration information

To view the current settings:
1. Click the plus (+) box next to the object in the Main Tree to expand that portion of the tree.
2. Click the icon for the server, ServeRAID controller, array, logical drive, hot-spare drive, or physical
drive to view its current settings.
Detailed information about the selected device will appear in the Main Panel on the right.

Using the ServeRAID Manager program installed on your system

When you install the ServeRAID Manager program on your system, you can administer and monitor other
systems with ServeRAID controllers as well as configure ServeRAID controllers in your system. For
further information about installing the ServeRAID Manager program, see "Installing the ServeRAID
Manager program" on page 64. To start the ServeRAID Manager program after installing it on your
system, see "Starting the ServeRAID Manager program after installing your operating system." For
information about administering and monitoring other systems, see "Using the Notification Manager" on
page 34 and "Using the Security Manager" on page 36.
Starting the ServeRAID Manager program after installing your
operating system
After you have configured your ServeRAID controller, installed the device drivers, and installed the
operating system, you can install the ServeRAID Manager program on your system to administer and
monitor your ServeRAID controllers, as well as modify the ServeRAID controller configuration.

Starting in Windows NT

To start the ServeRAID Manager program in Windows NT:
1. Click Start in the lower-left corner of the screen.
2. Select Programs → ServeRAID Manager → ServeRAID Manager. The Windows NT control panel
window appears. The program starts in the Information mode and a screen similar to the following
appears.
Chapter 3. Configuring controllers using the ServeRAID Manager program
29