Mercedes-Benz CLS Owner's Manual page 98

Do not interchange the head restraints of the
front and rear seats. Otherwise, you will not be
able to adjust the height and angle of the head
restraints correctly.
Adjust the head restraint fore-and-aft position so
that it is as close as possible to the back of your
head.
& WARNING Risk of injury or death due to
an incorrect seat position
The seat belt does not offer the intended
level of protection if you have not moved the
seat backrest to an almost vertical position.
You could slip beneath the seat belt and
injure yourself.
Adjust the seat properly before com‐
#
mencing your journey.
Always ensure that the seat backrest is
#
in an almost vertical position and that
the shoulder belt is routed across the
centre of your shoulder.
1
Seat cushion inclination
2 Seat height
3 Seat backrest inclination
4 Seat fore-and-aft position
5
Seat cushion length
To adjust the seat fore-and-aft position:
#
lift lever 4 and slide the seat into the
desired position.
Seats and stowing
Make sure that the seat is engaged.
#
To adjust the seat cushion length: lift lever
#
5 and slide the front section of the seat
cushion forwards or backwards.
1
Higher
2 Softer
3 Lower
4 Firmer
95