Mercedes-Benz CLS Owner's Manual page 319

Hide thumbs Also See for CLS:
Table of Contents

Advertisement

316 Breakdown assistance
Observe this Owner's Manual.
Observe the following if you do not intend to use
the vehicle over an extended period of time:
Activate standby mode.
R
Alternatively: connect the battery to a bat‐
R
tery charger approved by Mercedes-Benz or
consult a qualified specialist workshop to
disconnect the battery.
Notes on starting assistance and charging
the 12 V battery
Vehicles with a lithium-ion battery
When charging the battery and during starting
assistance, always use the jump-start connec‐
tion point in the engine compartment.
* NOTE Damage to the battery from over‐
voltage
When charging using a battery charger with‐
out a restriction of the maximum charging
voltage, the battery or the on-board electron‐
ics can be damaged.
Only use battery chargers with a maxi‐
#
mum charging voltage of 14.8 V.
All other vehicles
When charging the battery and during starting
assistance, always use the jump-start connec‐
tion point in the engine compartment.
* NOTE Damage to the battery from over‐
voltage
When charging using a battery charger with‐
out a restriction of the maximum charging
voltage, the battery or the on-board electron‐
ics can be damaged.
Only use battery chargers with a maxi‐
#
mum charging voltage of 14.8 V.
& WARNING Risk of explosion from hydro‐
gen gas igniting
There is a danger of hydrogen gas igniting
when charging the battery if there is a short
circuit or sparks start to form.
Make sure that the positive terminal of
#
the connected battery does not come
into contact with vehicle parts.
Never place metal objects or tools on a
#
battery.
The described order of the battery
#
clamps must be observed when con‐
necting and disconnecting the battery.
When giving starting assistance, always
#
make sure that you only connect bat‐
tery terminals with identical polarity.
During starting assistance, you must
#
observe the described order for con‐
necting and disconnecting the jump
lead.
Do not connect or disconnect the bat‐
#
tery clamps while the engine is running.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents